View Full Version : Project Finishing
- Sapele Chest Lid
- Cutting Gloss of Minwax Helmsman Spar Urethane
- Painting cabinet doors over existing finish.
- micro bubbles in finish, need help
- Top coating bm advance
- Repairing finish on dining room table
- Tinting and WB finish
- How to fix blushing in polyurethane?
- Can Shellac
- Fast and durable finish for Beer tap handles
- Lacquer question
- Paint over Maloof finish
- Sources for external door stain?
- Non-woven abrasives
- Anyone here brush on paint for face frame cabinets/raised panels?
- Uneven dye
- Caps
- Osmo Polyx testing
- FP and pore filling
- How long after barrier coat of dewaxed shellac must you wait before lacquer coats?
- Woca diamond oil cabinets
- question about water based finish
- Wiping on Catalyzed Varnish or 2k varnish
- finishing room filters and blower
- To strain or not to strain is the question
- Wood Slab Finishing Question
- Applying Watco Butcher Block Oil - does this sound right?
- Ghosting on cabinet door?
- Graco Sprayer Question
- Using Gorilla glue as a finish
- Finish for a book rack for first graders?
- Help with stain and wood options
- ProClassic Interior Waterbased Acrylic-Alkyd vs Waterborne Interior Acrylic Enamel
- Thinner for Epifanes
- Color Bleed
- Cloudy finish when doing mid-coat sanding
- Varnish application help needed.
- Preserving Patina
- Refinishing railing
- Help !!! Amber Finish over Pwater based polyureathane
- How would you refinish this teak garden furniture?
- Enhancing Poplar Weed Pot
- Teakwood weathered dining room table
- Rubbing out varnish finish
- Fuji pressure pot
- Darken natural edges?
- Staining/Dying QSWO
- Woodworker's Paint Sprayer
- Trying to avoid a water-based poly nightmare
- Sealing (finishing) inside a chest of drawers
- BIN Over Laquer
- Stain and Epifanes
- Weird spots on wipe-on poly finish
- Qualalac Lacquer on top of Shellac...wait time
- Spraying bin shellac
- Keep getting dust and specs in sprayed finish
- Applying home brew Danish Oil type finish
- Yellowing of White Paint - interesting read from General Finishes
- Maple Counter Top Finish
- Water stain on Seal-A-Cell
- How to get a finish like an old red barn - question
- How to finish american mahogany for a mantle
- Artificially aging wood question
- Staining or "smoking" oak
- HVLP tip size
- WB Poly problems
- Finish for clothes rack
- Steamer Trunk project - finish advice needed
- Sprayed dye - spots around pores
- Made a Mistake with WOP
- Refinishing Cherry Staircase
- Old Marine Grade Poly
- Indoor Clear Finish on Cherry
- live edge magnolia coffee table
- Working time for wipe-on poly
- Best way to clear finish teak plywood on kitchen cabinets
- Highlighting the medullary rays in oak
- Black Shellac??
- Match paint mixtures with a portable colorimeter?
- What type of Primer and Paint for MDF High Gloss cabinet doors?
- Question on grain filling
- Figured Cherry?
- Cleaning off sawdust prior to finishing
- Wood dye
- Help me spray a better coat of waterborne finish
- Paint that is sprayable with HVLP gun???
- Finishing new cabinet
- How To finish this Plywood Panel
- scratches in finish
- Face Frame with Recess Spray Question
- Refinishing Question
- 2 Different Wood Types
- Wipe-on-Poly streaks
- Can't flatten red oak desk top...my first project
- Finishing Makore Veneer on MDF core
- Finish for pyrography project with colored pencil
- Air compressor size
- Water-based finish for walnut (Target EM2000? EM6000?)
- White wash on Baltic Birch - pale white stain
- Telegraphing
- Red Oak Table top - Linseed oil & epoxy
- Spraying white based finishes. I cant see the wet line.
- Visit to Restoration Hardware
- Help with matching a finish
- Why did my spray lacquer with blush eliminator get crinkly?
- epoxy finish for a bowl
- Waterlox Sealer Finish
- How do I polish epoxy resin?
- How not to clean your brushes
- Finishing Walnut in dry climate, and moving it to humid climate question.
- Wood recommendation
- fumming white oak
- Filling voids in BB plywood
- Milk Paint?
- finishing red/white oak
- Preval Sprayer
- Photos onto wood/Poly
- oak finish expectation
- Surprise below the surface...any advice welcome
- Fix damaged table finish
- Buying a sprayer
- Need Epoxy advise
- Walnut with water based top coat ... what to bring out the character in the wood?
- Finishing QS white oak
- No sanding between coats of wipeon poly?
- ob shine juice
- Matching a weathered finish
- Hello Jamie Buxton
- Problem using aniline dye over wood filler
- Harbor Freight HVLP Gun for Latex Paint?
- Help with project
- Confusion - Choosing WHICH Sherwin Williams NON cat Nitro ?
- DUHHhhh - How to mix 5 gal NC Lacquer ?
- Finish for some fancy soffit
- Looking for a topcoat recommendation for a kitchen table
- Large DIY Spray Booth, How-To
- cold weather voc dispersal
- Decisions Decisions
- Low-fume Waterlox alternative ?
- Epoxy vs Arm R Seal bar top?
- filler recomendatiion
- Pore me and Bondo
- Fix topcoat GF Enduro Clear Polycrylic
- Getting stain into white oak pores
- Any problems staining before glue up
- painting over glue
- Elliptical stains on white oak with Transtint/DNA
- Repairing/improving an old shellac finish
- How do you measure liquid dyes?
- Question about sanding se
- Cleaning stenciled chairs
- Decided to try PTO
- Is Lacquer Colored? Base then Clear? How?
- Is this cherry blotch?
- How to make invisible MDF joints?
- GF Extender is Good Stuff
- What are you using for tack cloths?
- What's the most foolproof way to keep track of painted cabinet doors?
- Getting Oil Out of Gun Stock With Solvents....On A Budget
- Fuji Mini-mite 5 system?
- Finish inside drawers
- Painting White Oak
- White Oak and Mahogany table finish
- Tackling dust nibs on final film coat
- Problem with shellac
- Pin holes in epoxy??
- Let’s talk Shellac
- Polishing arm-r-seal
- Black spots on red oak after being wet?
- Better treatment for dry wood on antiques than lemon oil?
- Container for water based stain/sanding sealer/GF high performance
- A few questions for the furniture repair/refinishing folks....
- Finish for knife handles?
- Question about finish on bark/ natural surfaces.
- Good paste wax brands for antique furniture?
- Finishing Baby rattles
- Epoxy for wood finish
- Appying finish at cooler temperatures
- Thinning "Oil" base Stain question- Increase drying time ?
- Using Crayola Crayons as putty fill stick ?
- DIY Spray Booth: Tent?
- Walnut finish suggestion
- Odd project to apply finish
- Crinkled spray paint over shellac....
- bandsawbox-undecided on finish?
- Mix hand planing and sanding?
- How to sand epoxy flush, but not surrounding wood >320 grit?
- Finishing New Walnut Plywood vs. 50 Yr Old Walnut Plywood
- Card Scraper To Remove Wax?
- painting my dear cabinets
- Crystalac Brite-Tone finishing technique questions...
- Mix of Baltic woods - need help to fix the color
- stain color
- Finishing question
- Spray finishing table question
- Finishing African Mahogany counter top
- Spraying latex
- Any experience with Target CL-100 in EM-6000?
- Sanding Sealer -When to use- Confusion/clarification needed please.
- New HVLP turbine user, how do i figure tip, nozzle, etc from mfr recommendations
- Lacquer thinner variables ?
- Poly problem
- How to prep a prefinished door for refinishing?
- General Finishes Question
- Staining poplar and accentuating sapwood contrast
- Finishing MDF Baseboard
- Wiping on MinWax Fast Drying Poly
- Looking for oil based top coat
- Water white finish that is quickest to apply?
- Brushing shellac
- HVLP Sprayer recommendation for Air Compressor
- My quick and easy finish schedule
- smooth finish on checked wood
- I stink at color matching.....
- Lacquer and table finishing
- Varnish over lacquer outdoors
- Shellac Question(s)
- Help me in finishing the Walnut Plywood
- Life of Target Coating
- WAY over-applied 100% tung oil removal, stripping?
- Anyone Using Lenmar Clear or Pigmented Waterbornes?
- Finishing strategy for garden labels
- Small containers for remaining finish
- Finishing Bathroom Vanity
- Water resistance - Polycrylic vs Waterlox
- Need Help Thinning General Finishes Color and Top Coats
- Help With Matching White Washed Birch
- Poplar finish
- Cherry Darkened From exposure to Light
- TransTint vs TransFast and Grain
- How long for green poplar to turn brown under varnish?
- How do you suspend your workpiece to finish all sides?
- Issues with Waterlox
- Aging oak cabinet doors for UV
- Substitution for film finish on old Walnut dresser?
- Tips for Finishing before glue up
- Making a lacquer finish more water proof?
- Interior paint over exterior primer. Yes, No?
- Gloss Black Recommendation
- Cigar Ashtray finish recommendations
- 3M Accuspray gun/nozzle users - prepurchase question
- Finishing hand-planed surfaces
- Tinting lacquer
- GF Enduro WHITE Poly for cabinet doors?
- Laquer - Rubbing Out
- Removing black ink stain from varnished wood?
- Need advice on topcoat finish over BAC wiping stain
- Used Shellac for sealing over water based dye stain, but I think I used the wrong one
- If buying a second spray gun, Would you get the same as you have now?
- Waterbase for new chest
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.