View Full Version : Neanderthal Haven
- Hmmm, NIB Buck Brothers #4 ( $7??)
- Butcher block bench top
- I need a good block plane and some chisels...
- Azax beam drill
- I was on my way to buy an Apron plane...
- Veritas Iron Edge-Trimming Plane Vs Skew Rabbet Vs Jack Rabbet Vs Shooting Plane...
- Norris 51
- Comparing chisel steels
- Roubo: Traditional or Benchcrafted?
- A Bailey Tool Co Restore
- Department of irony, tablesaw edition
- Hand Engraved Ron Brese is finished!
- Anyone know anything about this miter saw?
- Wards Master planes?
- Is my diamond plate okay?
- Bedrock Hump or hump-less?
- How do you file the mouth of a plane to accept a thicker blade?
- Need a Mortise Chisel
- Who made this frog??
- Update on Kist.
- Le' Roubo Saw
- MF Langdon 74-C Parts?
- How can I compare grits?
- The Beauty of Tools
- Bowsaws
- Locking rabbet joints
- Name Stamp
- got tired of my tools rusting in the humidity - built a wall toolchest
- Wood or Veritas in Plough and Moving Fillister
- Ordered a LN block plane
- If you could have just one stationary saw
- Dunlap/West Germany irons...Metric??
- Advice cleaning up a couple of tools
- Some help with "appropriate" looking hardware.
- Manual dovetail journey
- Does anyone else here like ECE style German planes?
- Infill planes?
- Sharpening.....is diamond paper available instead of sandpaper?
- I didn't think I'd be the guy to start another sharpening thread, but....
- A real improvement on ebay for hand tool users...
- Stopped dado
- Handled Wood Moving Fillister Plane
- The awesome tool refabbing work of Wiktor Kuc
- 2 cheap fleabay finds
- Sharpening a scorp, bent draw knife, inshave, whatever you call it
- Roubo & Nicholson design combined?
- Flattening big stones
- $1 Rust Hunt find
- Vancouver
- My first hollow grind
- Not That Kind of Bench
- Inexpensive tongue and groove options?
- Lap Desk In A Weekend
- Diamond Paste / Oilstones - Help
- Need to finish pine the old school way.
- Saw and chisel grooves
- Sniffing Out Rust
- Inukubi Steel Plane Blade
- Whats your thoughts on Norton's 3X sandpaper?
- LN Tapered Back Tenon Saw or Traditional 16" Tenon Saw?
- The August Issue of PWW has arrived...
- drawbored MT joints for workbench
- Traditional Paint Recipes?
- tite mark gauges
- Anyone see the new Auriou / Chris Pye letter carving chisels?
- Tear out on glue surfaces
- Freehand Honing Microbevel
- Another update on Kist.
- Selling No. 72 to Jim Bode
- How to clean hand planes for restoration
- Cockbeading vs. hand beading with a beading plane?
- A chip breaker bending the iron?
- Sharpening question,
- Finally got some decent files on ebay...
- Hand Drill ID
- Lets talk chisel sizes
- Timberframe Saw Horses
- Math Sucks! – or I should always make more molding than I "Need"
- Sharpening A2 steel - first impressions
- What did I buy?
- How did your sharpening system develop?
- Lie nielson, always. Bridesmaid, never a bride...
- Had a piece of 2x pine...
- Knot in table top - need newbie type help
- Problem with a No 8 Stanley jointer
- Diamond sharpening media question
- Wanted to chew on my new PM-V11 chisels
- Union #120
- Taper a leg, handplanes only?
- Drying Yellow Pine
- Flat block plane blade essential?
- FINALLY...finished this cabinet (Follow-up to hardware question)
- Koyamaichi questions
- Titehammer chisel bashin' question
- Copper Try Square
- batten for work holding
- So how good is the PM-VII
- I can hardly resist the temptation!
- Where to buy a toothed saw plate for a backsaw build?
- Lee Valley free shipping 6-28 to 7-8
- whatcha gonna buy?
- Anybody here with Veritas skew block plane?
- GEM Miter box??
- Five Board Bench
- Neander Lessons learned- frame and Panel Doors for Spice Chest
- A little bit of sycamore
- What do you strike your chisels with?
- S. Biggin & Sons Backsaw Restore
- Lumber source for handsaw tote blanks?
- Tool Boxes - What kind of tool box do you use ?
- Where do I go to learn about Japanese chisels?
- Blade for Stanley Router handplane No 71 1/2
- Small gloat.
- Bullnose brass infill plane
- Building first handsaw; question about tote wood grain orientation
- Kist update - designing the base
- For a quarter?
- Shaker table from Schwarz DVD
- AreAny of the $60 to $90 Japanese woodworking chisels worth buying?
- Update on the Lie-Nielsen tenon saw I bought
- This Months Tool List... WOW!
- Check my LV and LN order
- Patters for dovetail saw handle
- How I use the Knew Concepts fretsaw
- Drilling a saw's plate?
- For the neander yard worker
- Gluing steel and Lignum Vitae
- Grindy Water Stone ?
- Bad Axe Saws
- Question for the younger generation
- Compare the LN 140 skew block with the LV moving fillister
- Best glue for inlay and stringing?
- Conservator's wax or Renaissance wax?
- New Tote for Veritas Low-Angle Jack
- It came in three bags
- Happy 4th July from South Africa
- Tongue-Cutting with Lee Valley Plow Plane
- take a look at
- Update on Tool Advice Needed (my order)
- What is the minimum set of tools?
- EdgeTek Bench Stone
- Stripping Painted totes from hand planes?
- Weird Jack plane thingy...
- Sanding and finishing saw totes
- Snapped a socket chisel handle
- A drawer for the kist
- Synthetic polycrystalline diamond paste — cheap and otherwise
- Pin gauge vs Marking/cutting gauge
- non-schwarz saw bench
- Old Stanley No. 80 versus Veritas Cabinet Scraper?
- Just playing with Barn wood
- Any Tips on Thicknessing a board with one long edge higher than the other?
- Breast Drill Identification Help
- Are Chisel Prices About to Plummet?
- Wenzloff Saws
- Rosewood knob for a Stanley # 140
- Just saved $1,000
- OK...so I bought this old chisel, but...
- Miller Falls Miter box 760?
- kickers and guides - drawer design
- Painting Stanley #7 1/2 router plane after sandblasting rust.
- Metal work question for Mr. Wilson
- How to secure saw plate in machined brass back?
- Vintage miter boxes
- Don't give a rip or is it time to buy a bandsaw thread
- Bought a toolbox full of goodies or lemons?
- Stanley Plane ID
- Strange chisel??
- My "disappointment" with my new Shaptons...
- 1074 spring steel
- Saw jointer?
- Saw with your stupid hand?
- Rust Hunt Prizes
- Turnscrew Heat Treat
- Removing paint from hand planes
- Making sandals (it's woodworking if you count cork...)
- Riven wood
- Type 9 No. 4C Bailey
- Plain Stropping - Looking for Advice
- D8 restoration project
- Neanders sans frontier - thanks to Jim Matthews
- That Strange chisel? New life for it?
- Rolled Bevel vs Micro Bevel vs Hollow Grind
- do you hone your card scrapers?
- I've taken the plunge.....
- Winchester 3070 router plane
- Saw Sharpening and Vises
- Design for Splitting/Cleaving Break
- How to set up/refurbish these saws
- Reunited With an Old Friend
- Finish for Boxwood Handles
- Flattening a Fine India
- Sharpening Stone Help
- Record 4 1/2
- Pennsylvania Spice Box --Line/Berry inlay with French polish
- Atkins “Demonstrations Saw”
- Been looking for a Finnish axe head ...
- Use wooden jack plane
- Name brand for this screw driver?
- Planes by Kobalt??
- Disston No7 panel saw handle out of white oak
- Old backsaw setup questions
- The Kist is Complete
- new production spoon bits
- Vintage Saw question
- Vintage saw question #2...
- Slick with a straight socket?
- The power of the chisel
- Rough first impressions of LN #5 versus LV #4 1/2
- Where can I find oddball interesting saws....
- Masking ground areas when refinishing old tools (i.e. mitre boxes)
- Ripping by hand and expectations
- Large frame saws
- Reliable source for folded saw backs?
- Dovetail saw sharpening services?
- Gun Blue for Tool Re-hab?
- Sargent rebate plane ID?
- $2.50 rust find with a Sargent 5206
- Grooving/ drawer bottom plane design question
- A piece of quarter cut sycamore and sapele
- plane blade grinding question
- Strange plane, for just $3
- A Dolphin locket coining die I finished today
- Rob's new Butt Chisels
- Whose has $345 to send Rob?
- Worn out sole needs some fixing
- Veritas or Lie Nielson Router plane?
- Help me identify this tool
- Homeopathic Grinding
- Yard sale find, but which plane?
- Clifton Handplane knob thread pitch
- Thoughts on applying paste wax to saw handles?
- I Hate When This Happens -or If I Knew Math Was Important I Would've Paid Attention
- Homeopathic Washita-ing
- First coinings from the dolphin die
- Question: Sargent VBM colors?
- Rasps and patternmaker rasps?
- Green Honing Compound for Polishing?
- Dunlap #4, but whose?
- Bench Grinder Heaven
- Advice on a basic planes
- Help with sharpening handsaw
- tool gloat
- Coarse waterstone?
- PIP: Stanley # 31 rehab
- LV Perfect Handle style chisels
- Cheap plane w/ dull blade - still worked a little
- Interesting Coffin Plane
- Drawer Building Bonanza
- What Is it?? Any ideas?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.