- Minwax Stain Problem
- Minwax Stain Problem
- Wb Shellac Vs Sealcoat
- Birch Nosing?
- Question for Sikkens (Cetol) users
- My Baltic Birch is ruined:(
- Which primer?
- No More Gallon Cans Of Stain?
- Letter to Minwax
- Need quick advice on Q4
- Finishing Danish Modern Style Furniture
- Maple Stain - Spice?
- Refinish old trim
- HVLP questions....
- Western red cedar finish
- stripping clear varnish--ugh!!!
- Probably Stupid HVLP Question
- Cleaning gun with Mineral Spirits or Lacquer Thinner
- Finishing a Walnut Heirloom Piece
- Finishing Plywood Question
- Painting Metal Question
- Buying Target Coatings
- Shellac - How much do I need?
- Any pointers on using Tried and True?
- Suppliers for Shellac?
- Sticky Shellac!
- How to get a dark stain on oak?
- Blo??
- Keeping white oak, white?
- Can I do the following?
- Please help me on matching soft maple to quilted maple veneer
- A refinishing question
- Newbie - looking for help on opaque white finish
- Using BLO
- Grinding Shellac
- 1st ever gloat!
- Help me understand shellac
- Staining Poplar
- Staining New Fence
- Best way to finish walnut?
- the infamous hot coffee cup ring on table top
- Will polyurethene "pull" and warp like veneer?
- Cypress chair finish
- Finish for my workbench?
- Menzerna polishing compounds
- Drying racks
- glues for certain dark woods
- Blocking stain from veneer / inlay
- Removing remaing stain and re-staining door
- Beginner finishing
- Can bleach fix this problem?
- How to Hide Curl
- blending scratchy (sanded) satin poly on floors
- Recommended Reading for Finishing
- porter cable PSH1 question
- How to change mask filter?
- Filling a crack in cherry question.
- Finishing Quater White Oak Dresser
- cedar garden bench complete & a finishing question
- Staining Maple plywood
- finishing cabinet doors
- Question about sanding
- Orbital sander swirl...
- Oil-based poly vs acrylic poly
- Spray Oil-Based Varnish
- Finishing Ash Help !!
- Spraying WB Outside
- Compressor for HVLP
- What type of paint
- Eliminate odor in finished drawers
- Aromatic Red Cedar
- Aniline dye questions
- Sanding after applying BLO???
- Could fabric dyes be used on wood?
- Red Oak, BLO, Oil Based Stain and then ???
- finnishing question? matching bamboo??
- why all the scratches
- Help picking out spray equip
- Question about Beall system
- Fruitwood
- refinishing roll top desk
- need some compressor help please.
- Figured it out!!!!
- Can I use poly directly on top of aniline dye?
- Fixing Blotched curly maple
- Dye causing cracks in oak?
- What finish would you use?
- Dying walnut sapwood
- Finishing Suggestions for a Flag Case
- Stripper help needed.
- Question on Harbor Freight Spray Gun
- How long for BLO to dry before putting a clear coat over it?
- Paint sprayer recommendation...
- How long should a pigmented stain dry between coats?
- Painting balustrades
- Best Type Of Paint For Shelves?
- Kitchen cabinets and Watco??
- Can I paint over lacquer
- HVLP: PC vs. HF
- Hardwood floor refinishing question: Brush or foam mop??
- Rubbing Out The Finish (Bubinga)
- Finishing edges of kitchen cabinets
- Finishing and safety
- HELP: another novice screw up with lacquer
- Steel wool question
- Walnut Box Finishing
- Whats a good durable finish for tabletops?
- Shellac on floors?
- How to get cherry toned finished like a pro?
- Scandinavian Dresser (Teak)
- Milk Paint question
- Moisture content & finishing
- Colony wood stains, still around?
- Cleaning Open Grain Oak
- Lacquer Wrinkle help
- Post-Finish Pore Fill Possible
- Spraying Acrylic WB
- Do you thin Deft Lacquer when spraying?
- Painting pywood/popular cabinets
- Need Finishing Help
- spraying paint
- Technique Question- Thinning WB
- OK to thin BLO?
- varnish applicator
- Re-painting wooden porch rail
- How do you clean your shellac brush?
- Danish Oil & Lacuer
- Turbine systems
- PC Conversion HVLP - how many nozzles do I need to buy?
- Pore filling
- Oil under shellac - better?
- Poor man's finishing "room"
- Oil based v. Water Based
- Oil based polyurethane floor enamel???
- Another painting plywood question
- Aerosol Sealer And Laquer
- birds eye maple
- What to watch out for finishing Ponderosa Pine...
- Inexpensive HVLP
- Airless paint tips
- Finishing Pine
- Dining Table Damage - Repair Questions (w/ pics)
- Alternative to Alkyd paint
- Can I do this??
- First time spraying
- Finish - Stepstool
- Finishing/Assembling Suggestions
- Bonehead Questions re Setting Up P-C HVLP Gun
- Question on PSH1 CFM needs
- Help with project please
- Painting raised-panel doors
- Removing HVLP Overspray?
- Best way to apply water based finish
- Removal of old finish
- Protect any wood from a little water?
- Down and dirty finish that still looks good
- Curly Soft Maple
- Sanding non-flat surfaces
- Fruitwood (with pics)
- How long to wait?
- Interesting Exterior Finish Testing Results
- Mixing tung oil with poly
- Questions on paint
- help on clear finish
- Fuji HVLP
- Help - Problem with Poly
- Apply finish to both sides of plywood???
- Recommendation for HVLP Finish
- Finishing "Palm Wood"
- BLO and Lacquer?
- Slippery finish?
- Lacquer over rustoleum -oops - now what?
- The Answer is Probably Experience
- Making it look old
- What size lazy susan for finishing work
- Ace Soda Blaster
- Paint gun?
- How do you finish hickory?
- titan 640ix
- Darkening cherry to match existing wood
- Finishing a Kitchen Island
- Very Vey Dumb Question re P-C PSH-1
- Tool Review - New Gramercy Brushes
- Proper finish for "Au Nautral"
- Poly, shellac, and nitrocellose lacquer question
- Can it be bleached??
- Fuming QS White Oak
- How do you finish a project with an inlay?
- Abralon pads and ploy.
- Walnut oil drying time
- Introduction...and a pine finishing question
- Just a thank-you...
- Will Citristrip soften Famowood solvent-base wood filler too much?
- 3M sanding sponge
- Finishing a Kitchen cutting Board table
- Latex or Oil-Based ?
- Sanding plastic
- So, where did the gloss come from?!
- Help needed with varnish finish
- Technique for spraying drawers?
- How to bring out the color of Purpleheart
- Finish for Trivet
- Refinishing guidance needed
- Wipe on poly too glossy this time
- The risks of oven drying finishes
- lacquer trouble:(
- Maple woodworking bench-what to finish it with?
- Seeking recommendation for staining cedar that will be close to salt water
- Can you legally spray lacquer in your town?
- Finnishing Question????
- Miniwax spar urethane question
- Finishing an Ash table question
- May I please get some topcoat advice?
- Opinion Wanted
- finishing white oak
- Lazy man's way to remove dust nibs
- Finishing new pine floors.
- Waterlox vs Arm-R-Seal
- Walnut blotches
- Shellac questions???
- Floor Finishing Help Request
- Help me try spray finishing
- Walnut turns white
- washcoat on cherry before Watco?
- Stain matching Maple to Oak
- How do you deal with a shellac drip?
- Target Coatings
- Finishing Mahogany
- 2 Tone Look - Cherry&Walnut or 2 stains?
- Finishing Cherry
- Finishing My Bed Bench
- Varnish over paint and stain
- Shellac and wax - question
- water based color staining
- Finish Thinning for HVLP
- air brush
- Refinishing newly finished piece ??
- Spalted Oak
- UV protection?
- I want to convert to water base finish and need guidance
- Brand of wax on cherry
- Finishes for Walnut?
- Finish for Butcher Block Counter
- Cherry Wood Finish Clarification
- Finish supply sources?
- End Table Top
- Finishing room size?
- When to Apply Finish??
- Spray Booth
- help - finish inside a cabinet