Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Ronald Blue Today, 9:43 AMMy router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: Ronald Blue Today, 8:39 AMHow is the Margin Of Error determined for a survey? I don't care who does the survey or what it's for I'm just curious how the margin is determined and who determines it.
Last Post By: John C Cox Today, 2:17 PMI'm pondering the economics of a mill vs buying rough lumber at retail/wholesale. In the Bay Area, depending on where you shop hardwoods like Oak and walnut can run up to $15-18bf/ft, or more for the rift/quarter sawn stuff. If one is able to source your own logs, running your own mil and kiln...
Last Post By: Rod Sheridan Yesterday, 8:29 PMHi everyone, it's been a while. We bought a property and I've moved everything into the shop. Countless trailer loads! I'm about to order clamp ducting and want feedback on designing the layout. Does anyone have any experience with design services for large personal shops? Paying a bit for...
Last Post By: Aaron Inami Today, 1:30 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Bump $70 conus
Gary Howorka Today, 2:51 PMI mentioned a few of those things because I've received a lot of products which showed up manufactured other than as designed. I hate it, but anymore;
John C Cox Today, 2:41 PMSomehow, people didn't seem to understand the difference between survey and marketing. "The Pepsi Challenge" was marketing.
I try to have at least one "Masterpiece" a year...
Varnish, 1st coat..
Waiting of varnish to dry...drawers and.
The hardest thing with surveys is that they can be done for many different reasons. One of the most common ones in the US is to influence a particular
John C Cox Today, 2:03 PM
Dining room carver chairs - Take 2
Thread Starter: Derek CohenAbout a month ago I began a thread about designing and building two carver chairs to accompany the 6 bentwood chairs we have owned for the past 40 years. The chairs were purchased all those years ago along with a table, which is around 200 years old. We need a larger table, and time has come to...
Last Post By: Derek Cohen Today, 6:12 AM