Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 12:56 PMOne of those sitting at the computer in the morning with a cup of coffee itching to buy a new tool ... So I come across this Veritas Scraper Burnisher for Turners and looked at a few videos reviews of it and thought why not. After reading a few reviews posted on this forum I later realized it was...
Last Post By: stephen thomas Today, 1:46 PMHad a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Jerry Bruette Today, 8:27 PMMy router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: Doug Garson Today, 9:01 PM:eek: too old and weak lol. well weak for sure! Cannot hurt to ask :) 6" jointer , Jet 50" cab saw..... fun huh. (no) well kind of. actually exciting! Friday or Sat or Sun ? I might be able to get a neighbor to help, but they are often very busy. I am in Van Alstyne. Beer Pizza $ ?
Last Post By: Jim Koepke Today, 1:32 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
That would be logical
My recently acquired son in law is interested in woodworking but space and his other hobbies limit how far
You might do better with handtools (drawknife, spokeshave, gouges) or handheld power tools (angle grinder with carving disc) than trying to model the
Kevin Jenness Today, 9:09 PMI have a Meber 16" bandsaw and want to upgrade it for a newer machine for resawing. I have a 14" old school Delta (made in the US) machine upgraded
Alan Heffernan Today, 9:05 PMIf you are dedicating this router to table use, you can bypass the internal switch and control the router with an external switch outside the dusty area.
Doug Garson Today, 9:01 PMThanks for everyone's input on the Rikon 70-1824 lathe. Having owned several Nova lathes and a Record Envoy lathe, I am now a proud owner of the Rikon
Harold Walsh Today, 8:55 PM
Dining room carver chairs - Take 2
Thread Starter: Derek CohenAbout a month ago I began a thread about designing and building two carver chairs to accompany the 6 bentwood chairs we have owned for the past 40 years. The chairs were purchased all those years ago along with a table, which is around 200 years old. We need a larger table, and time has come to...
Last Post By: stephen thomas Today, 3:07 PM