About a month ago I began a thread about designing and building two carver chairs to accompany the 6 bentwood chairs we have owned for the past 40 years. The chairs were purchased all those years ago along with a table, which is around 200 years old. We need a larger table, and time has come to...
Last Post By: Larry Frank Yesterday, 8:42 PMHad a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Jimmy Harris Today, 11:46 AMI've got a well head cabinet/enclosure to make which is in a remote location, about a 2 mile hike through the mountains without any trails. I've spent a few hours making measurements, and we will likely make this in sections, and strap them to our backs and assemble it in the field. There is no...
Last Post By: Maurice Mcmurry Today, 7:46 AMMy router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: chris hood Yesterday, 10:16 PMSeems like the last decent option for a small bevel gauge at Blue Spruce is no longer available. Previously Vesper was the gold standard but he's no longer accepting orders. I use the Shinwa with the bottom locking screw and it's pretty good. I also ordered the folding Shinwa with the knurled...
Last Post By: glenn bradley Today, 4:13 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Looking great, Jim. Your kids are fortunate to have someone like you to design and build multifunctional furniture. SWMBO took me through the Betsy Ross
Curt Harms Today, 6:09 PMIt is a handsome looking box Mike.
The woods compliment each other nicely
Thanks for sharing with us.
I'd grab an extra $100 bill and see if you can't convince the delivery guy to haul it back to your basement. Or, ask your neighbors for help. Even if
Jimmy Harris Today, 6:04 PMPrashun's post brought up something to think about. If I were planning on running that saw on 120 volts I'd want a 20 amp circuit and very little if anything
Curt Harms Today, 5:40 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 3:49 PM