View Full Version : Project Finishing
- Simulating walnut sapwood?
- Finishes compatible with disinfectants
- Picnic table finish
- Handhewn White Oak Fireplace Mantle Topcoat
- Handhewn Oak Fireplace Finishing Question #2
- Sanding before cutting. Does it really dull blades??
- Oil Based Poly Recommendation in California
- Filler for small imperfections
- Wood Finishing Question WB Dye / Danish Oil
- General Finishes Seal a Cell
- Shellac curing time?
- Wood Dyes
- fuming QSWO question
- Finishing chatke viga
- Natural Color Change of Aging Pine
- How to rescue these cabinet doors
- Arm-R-Seal over Danish Oil and 1000 grit...
- Latex not drying. Tried twice
- Portable exhaust fan for spraying waterborne inside of a home
- refinishing a table bench
- Has anyone used General Finishes Enduro Black Poly (Water Based)?
- Cabinet Paint for Spraying
- Earlex 6003 HVLP seems really hot
- Cedar finish
- Refinishing a kitchen table
- Touch up staining alder ??
- Finishing the unseen parts...
- Door Refinish
- Yay or nay to exterior painting/finishing plans?
- Tung Oil application
- Outside counter top finish
- Commercial Furniture: What lacquer gloss is typical?
- Pratt and Lambert #38 replacement?
- Cleaning Woodwork/Furniture
- Redwood sealer that highlights color
- ‘Weather exposed’ white oak finish
- Pecan farm table
- Maple and cherry speaker finish suggestions
- Polishing Out Epoxy Resin
- Curly maple
- Which water-borne, non-yellowing finish is the favorite these days?
- Hard Maple Rubbed Finish: Scratches and Swirls
- Wood and finish for outdoor bench
- Klingspor Fusion Foam pads
- Staining pine without yellow/red tint
- Gel stain for outdoor furniture?
- Wood filler over polyurethane
- Rubios Monocoat, have some 'nibs' after drying, thoughts on taking them out?
- Finishing and sealing Outdoor furniture
- Chestnut Stair Handrail and Baluster Finishing
- Waterlox Universal Tung Oil Sealer vs. Marine Sealer
- Anyone ever used "Seal once nano penetrating wood sealer/stain"
- antique finish for oak trying to remember
- Apollo vs Fuji vs Earlex vs ?
- Professional Finish on Kitchen Cabinets
- Arm R Seal over epoxy
- Cleaning up coffee table, not sure if I removed old finish
- Outdoor finish for African Mahogany
- wipe on/brush finish question
- Red Oak Tabletops are cracking
- SANDING SEALER - SPRAY vs. WIPE ON
- Moisture Content for Epoxy Encapsulated Slabs
- How to remove cloudiness in lacquer finish
- Question about French Polishing
- How to prevent underside of projects from being marred while spraying
- Water based equivalent for oil urethane
- What happened to my Waterlox finish??
- Moderately successful experiment with spraying BIN Primer
- Walnut finish recomendations
- Advice for matching old rosewood
- Seeking opinions on finish for mid century dining chairs
- Alumalite (SP?) Amazing Clear Cast Resin: Anyone use it?
- Paint
- is this ready for topcoat?
- Outdoor tool handle finish
- Best rattle can outdoor spray paint for metal?
- Sticky mess
- Mission Oak Finish-Worth the effort?
- Protective ‘tung oil’ type finish non-yellowing
- Staining cherry for contrast...will it fade away
- MDF Paint Questions
- HVLP advice wanted
- Tung Oil problem
- First experiments with HVLP (Fuji MM4, BM Advance)
- HVLP spray dye into corners?
- Burn through poly
- Best paint for outdoor bench
- pre-finishing: taping vs sticking dominos in
- Best applicator for Danish Oil?
- Need Help Finding an Easy Finish for a Black Walnut Box
- Ipe?
- How can I fix this?
- Cure Time for GF High Performance Poly?
- Penofin Hardwood Formula
- remind me again - HVLP (pressurized) sprayable door and trim material
- Refinish this door
- Best finish for wood that will be outside in the elements?
- Decision to pre-finish or not
- What HVLP sprayer do you use?
- Finish for wood under covered porch
- Water Poly vs Polycrylic vs Water Spar
- Maple kitchen drawer box finishing help needed
- Scratches in Dark Flooring
- Dining room table finish
- Dye dried unevenly
- Which water based finish to start with?
- Another question about dye finishing
- Mothball Smell in Cedar Chest
- Finish over image transferred to a wood Mug ?
- Target coatings Universal Sanding Sealer over shellac?
- Cabot waterborne polyurethane replacement???
- cherry darkening question
- Water based dye stain not fully drying?
- How many coats of EM8000CV are recommended
- Bamboo Ply Outdoor Finish Help...
- Cherry Finish
- A couple of questions
- Help - cloudy waterborne polyurethane finish
- Spray finishing thoughts
- Refinishing a Fiberglass exterior door
- Fuji gun question
- What do you spray drawer boxes with?
- Orange peel when spraying GF High Performance Topcoat
- Bubbles!
- Polyurethane on BLO?
- Spraying advice
- Protecting Wood After Regular Covid Cleaning
- Anyone refinish the Veritas chisel handles?
- Prepping Blue-stained Post and Beam
- Brushing GF White Poly?
- Help with Waterlox Original Sealer & Finish
- Minwax oil modified polyurethane varnish - appearance?
- Lacquer Finish Soft
- good visual reference to help with some HVLP spray problems
- Just lamenting on staining pine
- Anyone have experience using India Ink as a wood dye?
- How to get a durable, clear finish
- wipe on poly,,,need help
- Filling painted wood?
- Exterior Siding Sealer
- Choosing WB finish for powder room vanity
- BehLen's Rockhard Waterborne Brushing Varnish
- Looking for Upgrading My Spraying Eqipment
- Antique Doors- Protection?
- Question on spraying Benjamin Moore Cabinet Coat
- Natural bristle brush problem
- Finishing an Outdoor Bench made with Padauk?
- Durable topcoat for shellac/lacquer
- OT...Rattle Can Paint, Pinhole Problems...
- Selecting finish for red oak tables ??
- Osmo and Sapele...
- HELP -- Globs of shellac -- how to remove?
- Clear protection for brass and iron
- Target EM8000CV Conversion varnish
- Color of cherry
- Acetone Dye Stains and Drying Time
- Airbrushing Resources
- HELP! - Finishing a turn of the century Greener shotgun stock
- Sanding shellac
- Dyeing full sheets of baltic with bright colors
- SW's Emerald Urethane Trim Enamel
- Stripping: Make Repairs & Glue Before or After Methylene Chloride Stripper?
- Bubbles/Rough Epoxy Finish from Seal Coat (Mirrorcoat)?
- Finish for kid’s desk
- Extira project
- painted serving board
- Flat vs satin conversion varnish
- Sunproof 1 1/8 OSB? Lifting platform
- Can I color epoxy AFTER it has hardened?
- How To Finish A Cedar Deck
- Finishing Cedar bee covers
- School me on cabinet paint
- Help with wood and a finish for a blanket cabinet.
- TV Cabinet Finish
- Easy way to finish house doors
- airless rigs are easy to clean
- Bad Polycrylic Finish
- Repair finish help. New to me 2003 Stickley mission coffee table
- Refinishing a knob and tote on a Stanley Jack.
- Need ideas for a cheap spray booth
- anyone had good results using a Graco GX-19 or Titan 440 airless for finishing?
- Shellac is stupid
- food safe?
- Finish suggestions for wooden ofuro soaking tub?
- Refinishing stair rails
- Removing Non-Poly Spar Varnish
- Best Finish for Walnut Cabinetry
- Finishing Maple Kitchen Table
- Compatibility of Heritage Natural Original and Zar gel stain
- Outdoor Sign Finish that can be easily repaired in the Future
- California Mineral Spirits (CARB) for Cleaning Dust Before Finish
- Waterlox over wiping varnish
- Tung Oil Content In Common Finishes
- My water based sanding sealer nightmare
- Matching yellowing lacquer on an old cabinet
- adirondack chair finish
- Finish over wax
- grain filler question
- Total Boat Lust marine spar varnish
- Stripping previously stained wood.
- Arm-R-Seal help
- Help with EM1000 sealer
- Finish Suggestions For a Child's Desk
- 2 Questions on General Finishes: Sanding sealer lumps and HP on latex
- Rattle Can Shellac
- My Nitro Lacquer Turned White While Polishing?
- any experience with Odie's oil and wood butter?
- Target Coatings and Zinsser?
- good spray gun setup video
- removing fuzzy areas in soft wood before staining
- Finishing a planed surface
- Tips on first Spray-finish job?
- Epoxy problem
- Bird's Eye Maple....grain and eye highlights
- Abrading Waterlox Urethane
- Waterlox VOC finishes ?
- Finishing Birch plywood, Dog House/Kennel & Bookshelves
- Dye and grain filler
- Gel Stain/Arm R Seal help needed
- Aging Pine
- Walnut sapwood finising
- Question about GF Seal-A-Cell
- Help with HVLP Spayer Choice
- Correcting a bad finish on a stained / varnished desktop
- Tinting Poly
- Arm R Seal for floors
- Cutting board finish - beeswax and mineral oil
- HLVP Spraying in the winter
- General finishes water borne stain
- Blotch Maple
- Shellac then polyurethane
- Finish for shaker oval boxes?
- Help Choosing a Finish
- Refillable/Re loadable Rattle Can
- Sandpaper for water-based finishes
- Varathane water based finish
- Question about "buffing" Minwax Antique Oil Finish (MAOF)
- Can I apply General Finishes Arn-R-Seal over waxed shellac?
- Sikkens Cetol on exterior door
- Question about Minwax Wipe On Poly
- How to undo a mistake
- finishing a wooden cake knife
- need help with finishing order with kitchen cabinets
- Finishing 1150 sq ft of 2x6 T&G SYP roof decking
- Waterlox and H2O Lox completely compatiable
- Finish for max chatoyance
- Wood and/or stain to go with Baltic Brown Granite?
- Removing stain from red oak
- Painting Birch Ply
- Brushing Amber Shellac
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.