View Full Version : Project Finishing
- Personalized lettering
- Waterlox odor control
- Bringing Color Back to Bleached Oak
- New to spraying, a couple of questions.
- BLO before paint on exterior woodwork?
- water based over watco
- Help with matching an old color from Dad's work 40 years ago!
- Coffee table finish suggestions
- west epoxy pre coat before painting outddor woodwork.......does this work
- how to preserve metal sculpture on florida lanai
- Unfinished pine molding on tinted acrylic lacquer pine veneered door. How to finish?
- Two tone oak raised panel door after staining
- Need help determining species and finish...
- Water Base Poly over Water Base Stain
- Finishing Poplar
- Charles Neil Blotch Control
- Noob building a fish tank stand with walnut panel doors... I have a few questions!
- aerosol sprays
- Finish Advice for a Small Live Edge Furniture Company
- Rockler gel polyurethane two thumbs up
- Why are they called chip brushes?
- What replacement for Pratt & Lambert 38 ????
- Stain Supplier in SF Bay Area
- Poplar drawer boxes - to finish or not
- General Finishes Armr Seal
- Apollo 1050VR
- Question about varnish coverage
- Microfiber cloth works great for wiping on Shellac
- Dealing with extremely blotchy wood
- Clear finish for Cheerios???
- New to spraying , need help on finding finish.
- Maple Kitchen Cabinets
- Water-White Finishes for Bleached Wood
- Shellac over acrylic lacquer?
- Howard's Restor A Finish?
- I Hate When SWBO Changes Her Mind
- Spraying Latex Finish Quality
- Walnut
- Water based stain problems
- Funky Shellac
- problems leveling a varnish finish
- Finishing cherry wood cabinet doors
- Sealing the Gasket on a Spray Gun Cup
- Waterlox Gloss Polishing
- Finish Restorer?
- Dye Question
- Staining Poplar
- Tiny Bubbles in Waterlox Origional
- What am I doing wrong?
- Walnut dining room table finish suggestions.
- walnut round
- ' Mineral Spirits ' question
- Crystalac Shelf Life?
- Sealer before waterbased poly?
- Walnut and Maple Burl Wainscoting
- Varnish Types and Mixing My Own Wiping Varnish
- White Paint Recommendations
- Has anyone see/heard from Sheldon Pettit (SAM)
- what type of paint over general oil finish
- White waterborne lacquer (acrylic) schedule
- Using Transtint dye - is this regimen ok?
- Advice needed on restoring a discolored section of oak floor
- Mixing oil based stains
- What's the clearest finish/sealer?
- Jeff Jewitt - Walnut finish (When to fill the grain)
- INSL-X Cabinet Coat....
- Epoxy for Concrete countertop.
- Advice for finishing a vertical grain fir door
- Sherwin Williams Grain Filler - Shelf Life
- Finishing Books/DVD's
- How to refinish an old plane tote?
- Need advice on first HVLP setup......
- How to Dye small strips of wood
- Campbell Hausfeld HV2002 - Turbine....Anyone?
- deepening purpleheart
- How would you guys fix this issue?
- HVLP for urethane
- Guidance Request for Polyurethane Application
- Waterlox: Wipe It On Like A Kid Wiping Tables At A Fast Food Joint?
- Does Anyone Use Sherwin Williams..
- Is this ok way to finish cabinets?
- Tips/Tricks for applying brush-on water based acrylic finish?
- Mahogany & Potassium Dichromate
- Putty/Filler help
- Looking for some advice on first HVLP experience
- Paint Brush Multi Package...
- Having a Little Trouble With Topcoat !st Time Using a Brush
- Help please.
- Recommendations for Finishers
- Cleaning HVLP guns after spraying water based finishes (e.g., General Enduro-var)
- Air Cap and Needle Sizes - Converting
- Classic Car Dash - Burl Veneer Finishing
- Finishing 11-ply Birch plywood for outdoor use
- HVLP - Start with Basics First, Need some Advice....
- Problems with finish "cracking"
- Shellac Over Oil Stain
- Leaky Fuji HVLP Gun - XPC Gravity Gun
- Question about Howard Butcher Block Conditioner
- Buffed wax finish on tabletop streaking in use, other options?
- What good quality gravity HVLP gun do you recommend?
- Amber WB Poly?
- shelf life of shellac flakes
- What Type of Wood
- Milk Paint over shellac??
- Finishing Plan for end-grain Walnut Table
- Finishing the edges of door trim
- Anyone made NC lacquer similar to how Shellac is made? i.e. Dissolving flakes
- Dining Table Finishing Schedule
- Does anyone know about a lacquer that is as thick or thicker than syrup???
- Paduak "Bleeding" into Soft Maple?
- More thoughts on spraying shellac
- Best finish for outdoor bench
- Finishing Corn Hole Boards
- Pratt&Lambert #38 Satin Problems
- Advice on Epoxy selection
- Painting new raw kitchen cabinets
- Help - What are the proper steps to finish this project?
- Finishing Before Assembly
- Enduro Var - orange peel texture?
- Finishing Maple
- Rattle Can Lacquer
- Pine finishing
- Wipe on Poly - How many coats?
- Finishing -- Hard Maple vs Soft Maple
- Cypress and Epifanes
- Finishing tips need for waterbased poly application
- Blue tape
- Dye Stain on Hard Maple
- Adding dye to dewaxed shellac
- Help with a blotchy staining project!
- Deft Danish Oil availability
- Enduro-Var spraying
- Finish Schedule Hard Maple
- ML Campbell Pre Cat Primer problem
- Color Concepts Finishers Color Wheel
- Shellac Source
- spraying cabinet doors
- imprefect joint
- wooden counter top finish.. what to use?
- Wavy boards
- Green finishing options
- Pre-raising Grain
- Mixing Dyes
- Newbie rubbing questions
- how would you finish this?
- Finishing/Staining Door Panels
- Lacquer application situation
- Problem with lacquer finish
- Mesquite Finishing
- Waxing 10/4 cocobolo board for storage?
- Trans Fast Dye
- waterlox?
- sun thickened linseed oil
- walnut shells as a dye
- Alcohol for shellac
- I need to spray- STAT!
- trying to locate a hinge & clasp
- Need Sprayer Advice, Earlex VS .....
- Staining new/old wood to match
- Tool Tote - finishing ideas
- Shipping A Newly Lacquered Item
- Teac finishing/refinishing
- Gel stain over polycrylic?
- sunlight curing for poly?
- What finish do you use on heavily used shop jigs?
- Need Help....AGAIN
- varnish blistering
- Ammonia Fuming White Oak
- White spots after varnishing
- General High Performance Poly for a walnut table top vs. Endurovar
- Giant koa wood desk. Small dilemma
- Paint and primer or Kilz first
- Finishing question
- What finish to use on Baltic Birch plywood suitable for autographs
- Shellac on Walnut ply - Method?
- Mistake.... Do I let stain dry before stripping?
- Strip or sand oak?
- Dye on Maple
- Sticky Paint Job
- Instructions for HVLP Spray Gun ?
- Memory Foam attacking headboard finish
- Finishing a Cabinet
- Varnish brush for Mouldings
- General Finish gel stain products vs poly for pine early american furniture
- Dying Before Assembly
- Problem with MLC Resistant
- Custom Mixing Wood Dyes
- Boiled Linseed Oil What grit to stop at?
- Stripping old wooden chairs
- Commercial bar top finishes
- Floor Finish for Table Tops/etc
- Airless for lacquer advise
- Coloring Timbermate to use as a grain filler for walnut
- Dehumidification
- Wood veneer Dashboard
- Clear grain filler options
- Should I clear coat over opex lacquer paint?
- Airless Paint Sprayers
- Help - Sticky Finish
- Spraying WB Poly
- Old Sticky Lacquer, What to do?
- Shellac (Zinsser products) - Strong Alcohol odor?
- filler recommendation
- Cherry and avodire box finish?
- Finishing items - with profiled edges and when both sides need finished
- Earlex 5500 Cleanup
- Pre cat lacquer raised panel edges before glue up?
- Has anyone else had this happen?
- What paint color would closely match Blueboard color >
- Tried and True over Waterlox
- Zinnser shellac.
- Poly Urethane Over a wood hardener/petrifier
- Am I asking for adhesion problems
- Minwax Polycrylic, Air Bubbles or Bad Technique?
- Need direction on finishing an outdoor table
- Acrylic paint on Poplar
- Circa 1920's Rocker Help Please
- Conversion Varnish or Lacquer for kitchen cabinets?
- HVLP Gun Purchase Question....
- Spraying Dyes, Stains and Top Coats
- Gransfors Bruks Axe
- Pre-finished ply scratches
- M L Campbell products finicky
- how to make poplar look like walnut
- HVLP - Older Used Pro Apollo vs New Hobbiest Model
- To darken cherry should I expose to the Sun before I finish?
- Sanding between Coats of Finish
- Less glossy Waterlox finish?
- Finish for unfinished side of pre-finished ply
- Proper finish over dewaxed shellac
- Finishing Windsor Chairs
- Cannot find Cabot Australian Timber Oil
- Water based poly over oil??
- Calling all Earlex 5500 HVLP owners - question about thinning Nitro lacquer
- Getting that dark brown Mahogany.
- Table Top Finish Poll
- Painting PT plywood
- Spraying nitro lacquer - weird small, hard white specks
- If your sprayer will spray full strength, un-thinned lacquer, is it best to?
- Shellac Question
- Stripper resistant coating
- What do you use for applying dye??
- Portable / Knockdown Spray Booth
- Finishing Solid Rosewood Guitar
- ML Campbell Magnamax 275 additive for flowout?
- Cupped tabletop - could it be related to water-based dye?
- Strengthening/finishing Spalted Wood?
- Making a cure oven, advice requested.
- Ultra durable finish for dining table?
- finishing the exposed edge
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.