I've got a well head cabinet/enclosure to make which is in a remote location, about a 2 mile hike through the mountains without any trails. I've spent a few hours making measurements, and we will likely make this in sections, and strap them to our backs and assemble it in the field. There is no...
Last Post By: Thomas McCurnin Yesterday, 9:57 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jerome Stanek Today, 12:36 PMSeems like the last decent option for a small bevel gauge at Blue Spruce is no longer available. Previously Vesper was the gold standard but he's no longer accepting orders. I use the Shinwa with the bottom locking screw and it's pretty good. I also ordered the folding Shinwa with the knurled...
Last Post By: Jim Koepke Yesterday, 7:01 PMHi, I'm new to the forum. I'm 78 and have been using a Craftsman 10 inch 113.298051 for the last 39 years to build furniture for my house and various projects. I never upgraded until now because the craftsman could do what I needed and I didn't want to spend the money. Last week the fence wouldn't...
Last Post By: John Lanciani Yesterday, 10:19 PMI'm going to build some built-in bookcases in my house. The complicating factor is that the ceiling is 10' high. Of course, many have suggested I make some cabinets on the bottom half and then put shelves above so that the shelves would be 8' tall or shorter, but I don't want that; I want all open...
Last Post By: Tom Bender Today, 9:18 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Question about storage of unopened Mineral Spirits and Naphtha...
Does any evaporation take place over time, say up to a year?
I know Acetone
The marble was 36" square and I wanted the table to be at least 44" . The 2 x stock let me go that wide so I did. Brian
Brian Runau Today, 5:13 PMMy "shop" consists of a shop smith, used for drill press, lath and band saw, against the garage wall, six ft of shelving with a few power tools
Patrick C Daugherty Today, 5:11 PMYears back, he was asked what was his favorite cover of one of his songs.
Answered that hands down, it was Bonnie Raitt with Angel from Montgomery
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 5:52 PM