Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Dan Friedrichs Yesterday, 4:13 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jim Koepke Yesterday, 5:36 PMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Maurice Mcmurry Yesterday, 8:02 PMI have a Laguna 14BX 2.5hp 14" bandsaw and a 3/4" Resaw King blade which was bought together with the bandsaw. It works very well and the 3/4" Resaw King blade cut very well although I don't have much experience with bandsaw and don't know how well other bandsaw cut. However, there is always a...
Last Post By: Bernie Kopfer Yesterday, 8:58 PMAfter last year's trip to this part of the country, a second trip is needed. Total trip recap is in this thread from 2023. https://sawmillcreek.org/showthread.php?301671-Looking-for-some-travel-tips-SC-TN-KY-WV I’m planning this second trip for the fall. I have about 16 days/nights I can be gone...
Last Post By: Michael Drew Yesterday, 2:47 PMU haul has a service where you hire some of their guys to show up and help load or unload. Ask the high school football or wrestling coach. Pay them
Bill Dufour Today, 12:00 AMGF? plus more words to make it count.
Bill D
Sam, I replied to your message, but for some reason not getting a notification they are going out. It's yours if you still want it and yes I can help
Robert Hartmann Yesterday, 11:46 PMI would take the wood flooring and the subfloor out of the picture. I would bolt some ~5" round spacers directly to the concrete and make the spacers
Michael Schuch Yesterday, 11:30 PMI haven’t done that as I don’t think it takes very long to shape the outside but let us know if you try it and it works well.
I’m pretty
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Yesterday, 10:02 AM