Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Alan Lightstone Today, 8:24 AMThere is a person, that has designed very crazy looking squirrel houses. All kinds of fancy, moving parts, and such. He sells the plans to make these squirrel houses in print form, as pdf, and as dxf. He does not sell kits, nor parts. Plans only. Oh his policy page, he writes the following: ...
Last Post By: Doug Garson Today, 8:36 PMAnswer = Tape
Last Post By: Mike Soaper Today, 8:13 PMI aim to finish these about the time the new master bedroom remodel completes. Otherwise they will clog up the shop until I have somewhere to put them. These are styled after the blanket chest I shared here which is part of the new bedroom suite. . . . . . Carcasses mainly done. ...
Last Post By: Mike Allen1010 Today, 2:05 PMStarted a project that requires 3 pieces each of maple, walnut, cherry, and padauk, 1/2" x 5" x 14". Used kiln dried boards ~4 foot long, 5/4 maple, 4/4 walnut, cherry, and padauk. I resawed the lumber to 9/16"~5/8". All of it except the cherry came out flat enough to crosscut and plane to size....
Last Post By: John C Cox Today, 8:02 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Interested in scraper set and non-redundant Japanese chisels. PM sent.
tom lucas Today, 9:26 PMI don't see where the statement waves any legal responsibility by saying you can't use the plans for profit. I also don't see any need for a squirrel
Doug Garson Today, 8:36 PMConcur with Michael. My Oneida 3HP "V system" makes me forget that MDF makes a mess unless I start a carve before turning it on. Dust of all
David Kenagy Today, 8:33 PMJust bought a DeWalt DXCM603 (60 gal, 5 HP) compressor. Its main job is to supply continuous purge air to a spindle, and sometimes to blow dust out of
David Kenagy Today, 8:25 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 7:07 PM