Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Ron Selzer Yesterday, 1:02 PMJust read a post where the guy called himself an epoxy woodworker. Made me think about other combinations; steel woodworker, non ferrous metal woodworker...... Got any other ideas?
Last Post By: Edward Weber Yesterday, 3:47 PMI've seen threads discussing the pros and cons of straight-sided versus bevel-sided mortise chisels. The big takeaways seem to be 1. Straight sides encourage a straight mortise with less chance of side-to-side wander 2. Chisels with angled sides are easier to extract after a chop and aren't so...
Last Post By: Cameron Wood Yesterday, 11:11 PMThis thread has no redeeming value. You have been warned. Got an ECE block plane here recently. Solely out of curiosity went I looking around, and found LV carries ECE planes, but not this one, but they do have replacement blades for it - which I will never need. Even so - I was pondering...
Last Post By: steven c newman Yesterday, 3:54 PMI aim to finish these about the time the new master bedroom remodel completes. Otherwise they will clog up the shop until I have somewhere to put them. These are styled after the blanket chest I shared here which is part of the new bedroom suite. . . . . . Carcasses mainly done. ...
Last Post By: Jim Becker Yesterday, 9:53 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Duh, no wonder, shop vac went out of business about one year ago.
Bill D
Kiwi wood?
The way our jr high shop classes were set up, you could only take them in 8th & 9th grades. I took Industrial Drawing in 8th
I went thru and started deleting apps found the one causing problem thanks guys for all the help and suggestions.
Bert Kemp Today, 12:31 AMRichard -
There are lots of times vac will be easier. Much depends on individual shops, specific projects aside.
Both are tools to be applied
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 3:16 PM