There is a person, that has designed very crazy looking squirrel houses. All kinds of fancy, moving parts, and such. He sells the plans to make these squirrel houses in print form, as pdf, and as dxf. He does not sell kits, nor parts. Plans only. Oh his policy page, he writes the following: ...
Last Post By: Thomas McCurnin Today, 6:42 PMThis thread has no redeeming value. You have been warned. Got an ECE block plane here recently. Solely out of curiosity went I looking around, and found LV carries ECE planes, but not this one, but they do have replacement blades for it - which I will never need. Even so - I was pondering...
Last Post By: Warren Mickley Today, 11:39 AMRegulated season opened yesterday. Trip to Savannah, veered off the interstate to get some
Last Post By: Maurice Mcmurry Today, 3:46 AMFor those of you who have a Festool Kapex, I suppose you've heard of the notorious motor failure problem. I had heard of it before I bought my Kapex in 2016, but I was feeling lucky and figured it wouldn’t happen to me. Well, it did. It’s a well-known problem and there’s a lot of...
Last Post By: Warren Lake Today, 6:36 PMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: Warren Lake Today, 2:10 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I am not very qualified on the subject but I’ll share what I have found that seems to work for me. I bought a used LN #5 a couple years ago that showed
Adam Grund Today, 6:44 PMI think that language would be practically impossible to enforce.
Thomas McCurnin Today, 6:42 PMI use a string of 12ga electrical wire strung through the hole in each socket and twisted together into a crude circle type thing. Works for me.
Thomas McCurnin Today, 6:41 PMas a self employed human it was always best to take care of customers really well. Repeat work over many years proved that to me.
Warren Lake Today, 6:36 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: John Ziebron Today, 4:31 PM