Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Yesterday, 5:04 PMSaw this today while reading a story about the prospect of electrical distribution networks failing due to heat: When I mentioned to Candy that transformers don't "slow down" high voltage, but "step down" high-voltage to a lower voltage, she said, "it's just semantics." Though it seems...
Last Post By: Nicholas Lawrence Today, 8:16 AMAccording to the book I'm reading (What If ? 2 by Randall Munroe) The second programmable computer, UNIVAC was the size of a room, made in 1951 from vacuum tubes. If the same machine was made from Iphone chips today, they could be imbedded in a single grain of salt.
Last Post By: Doug Garson Today, 1:11 PMHad a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Jimmy Harris Today, 11:38 AMPlease, this is not a question asking how to best sharpen hand tools, it is a simple question to ceramic stone users. How hard are they to maintain? My diamond plates are years old and do not cut as aggressively as in the past. I have a selection of water stones of known and unknown grit for...
Last Post By: John C Cox Yesterday, 4:35 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
"Anyone that don't love the blues, gotta hole in their soul"
I grew up in England in the 60's, the blues had just arrived,
I don't think the orientation makes that much difference, when the grain runs out along the length of the tool as much as it appears to there.
no I don't do any commercial, this is for a roofed entry up in hollywood. Those 2x12 you saw us burning are the gate boards
https://photos.app.goo.gl/wGbHWGbYU7Fgo6M87
Great Neighbors! Jet cab saw and Jointer in Place, all of the heavy parts done. Will be probably two weeks from now until I can fully assemble and align.
George Speed Today, 1:13 PM
Left lane
Thread Starter: Ole AndersonLord, give me patience and understanding for those folks that drive needlessly in the left lane. Amen
Last Post By: Bill Dufour Today, 11:34 AM