Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Kevin Jenness Today, 12:26 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Brian Elfert Today, 8:31 AMRegulated season opened yesterday. Trip to Savannah, veered off the interstate to get some
Last Post By: Kent A Bathurst Today, 3:03 PMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: Warren Lake Today, 1:02 PMThis will be a "build" thread with a bit more detail than I've been doing lately, but it's an interesting project. Some might find it useful; some might scoff. :) But I just can't wait until the end to start posting because it would be too much to post all at once. -------- For background, our...
Last Post By: Jim Becker Yesterday, 8:03 PMWhile I understand your desire to keep only one band on the saw...and it's certainly possible to use, say, a 3.8" 4-4 TPI band for general cutting,
Jim Becker Today, 5:33 PMBear in mind I’m not an expert, just working from experience and lucky enough to have recieved good advice over the years.
The rotary
I have one of those. It took some time to get the fence exactly 90* to the table. I bought the saw from the outfit in the Atlanta area that sold lots
Curt Harms Today, 5:13 PMThere are annual dollar minimums for revenue before the requirement kicks in for state sales tax in some cases (by state), so some small sellers may still
Jim Becker Today, 5:13 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Today, 5:24 PM