View Full Version : Turner's Forum
- Heavy duty spindle turning caliper
- Identify this Delta lathe please
- Some people get lucky
- Wood Identification Help
- Walnut pot
- "Antiquity"
- Bowl from a Board Cutting
- Another stumpy bowl
- Bangle Braclets
- Natural edge Ambrosia Maple bowl
- "The sprit of Hawaii"
- Pro Sharp Spectrum by Geiger's Solutions
- An a-HA! Moment
- Black & Green
- Sharpening station cart height?
- where to buy step pulley for lathe
- Yorkshire Grit
- Oh no, more experimenting ahead.....
- Coloring for peppermills
- Operating bench grinder using CBN wheels without guards?
- Sharpening a round nosed scraper question
- Tangential turning
- More wood....what else?
- Wet double stick tape
- Getting more comfortable with lightning pyrography
- PA system for woodturner's meeting
- The wrong way to use a drill [or lathe]
- making a glue block
- Buffing questions
- Knitting bowl - 1st attempt
- Bench Grinder Spherical Washers
- Some more helpful hints on assembling a 3520 lathe
- Baltic birch lidded bowl
- Off to Turn On Chicago.
- Attempt at tangentail turning....
- Walnut
- How to set grind angle?
- Nice visit with a turner today!
- Disappointing Sorby Tool
- Substitutes for wood veneers...?
- 50 Wine Stoppers
- EWT Chuck
- Shortcut to finely crafted wood turnings - buy it
- Figured Walnut Platter - 29" diameter
- Niles Bottle Stoppers
- Outdoor Sanding/Carving Station
- Some recent work...
- Vicmarc Chucks Safety Ring
- Kudos to Craft Supplies USA
- Set of dinner plates
- Heat curing of various glues......
- buffing- lathe based or seperate buffer
- Hurricane CBN Smell?
- Rather odd turning
- Collecting Black Locust tips
- Lathes with VFDs
- Trend Airshield Pro Replacement Headband
- Sanding Aides for Wood
- Fulton 1071 brace drill
- Running bench grinder with only one wheel?
- Vacuum chucking system
- Carbide Tools for Newby Turner
- Oval(ovoid) Cone
- What's a fair price for a used Delta 46-460?
- Mobile base for Nova 1644?
- My first all walnut bowl shaped thing :)
- Powermatic 3520C?
- Still another CBN question
- Mattison 66 Autocopy Lathe & Suggestions
- Should keep me busy for a while...
- Anyone use Hunter's Jimmy Clew Mate tool?
- Chance to buy a One Way 2436 in NM for $2800. Is it worth it?
- Got the DVR upgrade for my Nova 1624 - two thumbs UP!
- Artistic spalted cherry bowl
- 1st burl attempt !!
- Green wood end grain sealer iTree Saver Brand vs Anchorseal vs Anchorseal 2
- Heads up on a used Oneway 2436 in Poway, CA
- Bowl finish suggestion
- Wooden Pole Lathe
- Box Elder
- Woodturners in Missoula, MT?
- Head and face protection
- Two nice big ones
- First Hollow Form
- Pear "Grenade Wood"
- head and face protection part 2 with pictures.
- "Hats Off"
- Jet 1221
- JT Turnings Gizmo Hollowimg system
- Black Walnut Root Ball
- Metal or plastic to help the fit of turned box tops.....
- Trent Bosch tools
- Donuts
- Willow Burl Hollow Form
- Threaded attachment
- Cascading waterfall - an exercise in filling cracks
- Deep Sanding Question
- Wearable Sweet Gum
- Carbide tool relief cut
- Sanding Sealer Issue and Salad Bowl Issue
- Is Not Having A Hand Wheel On The Head Stock A Nuisance?
- Are these grease ports?
- Finishes
- Turnings from class
- hackberry question
- CA glue storage
- Headed to the Fair
- sanding solution
- Liturgical Turnings for a Pastoral Friend
- The difference between a 3/8" spindle gouge and a 3/8" detail gouge
- Evolution of dust collection for a woodturner
- Unimat SL Lathe
- jumping in the vortex
- Entered a local fair
- Advice on Grizzly 1495
- Renaissance wax question
- New Turner Needs Help And Advice Prepping And Cutting Green Logs
- WOOD I.D. Help
- Salvaging blown bowls
- New Parking Space for Tail Stock
- Columbus, OH woodturning??
- 7 month old 3520B
- Acrylic clear coat blistering
- Harbor Freight Angle Drill - surprisingly quiet
- 1", 2", & 3" sanding disc storage?
- Visit to a "Fine Woodworking" gallery.....
- About to pull the trigger on a coring rig
- Need help finding a specific vendor re: Vacuum Chuck parts
- Used 766
- Seat Blank
- Tail Stock Parking Space Update
- Hope Easy Arm Hollowing Jig from England
- CBN grinding wheels and the steels they are suitable for?
- honey suckle twisted wood
- SWAT Attendance Question
- Turning colored acrylic
- Ort Brothers
- Setting up for production turning....
- Help - Need 1"Dia rod with 3/8" center hole full length
- Bad things happen if you leave a Burl on a bandsaw...
- Carbide Tools
- Carbide Inserts for Turning...Difficult
- Negative Rake Scraper
- Smaller spalted Apple bowl with some unique coloration
- Finding dye-based double-end markers for chatter-work
- Black Walnut crotchwood bowl
- Robust Comfort Rest
- Prep for Coring rig test drive and Tony's Wood
- Robust mini J toolrest 5/8 post
- Thin-Walled, Figured Cottonwood Bowl
- Delta 46-460 parts issue
- Butternut AKA White Walnut bowl
- Best lathe out there
- Hollowing systems
- Dennis Stewart Hollowing system
- Coring fun for" Creekers"
- Do you hone your gouges?
- Tricks to using CA glue & coffee grounds to fill voids?
- Another lightning pyrography experiment
- Taking a break from woodturning
- Difference Between Skew & NR Scraper?
- Made a couple of tool rests
- Bottle opener kits
- epoxy
- Guess im back, long time no see.
- Burls...I am Lost
- Want to get clean finish with holly laminate
- Bench Design Ideas For Processing Logs Into Turning Blanks
- Segeasy vase
- Jumbo jaws - Vicmarc or Stronghold?
- Trouble with Cabinet Scrapers and Bowls
- 1st Segmented Turning attempts
- Powermatic safety cage
- What to do when ferrule hits platform?
- How to identify "good" crepe myrtle?
- Vacuum chuck pump?
- Oneway Talon Chuck and Morse taper2
- Grain orientation in segmented turnings....
- Rotary vacuum adapter for vacuum chuck setup
- Grinding Wheel
- First bowl on my new lathe
- Help! My tailstock won't lock down tight
- heavy and thick wall compared to light and thin walled bowls
- Finish for wine bottle stoppers
- Pens and Ornaments
- new to turning, what accessories do I need.
- Watertight Bowl Finish
- Burning turning with wire
- Are Oneway Pro-PM Tools a Good Choice?
- Lathe sanding speed
- "Sail Away"
- Little pierced HF
- Scrapers.
- Flushing Gast 0523 vacuum pump?
- Highly anticipated turning demo
- A bell for her 90th
- Possible Wood Allergies
- Time-delayed CA -- have you used it?
- Nova 3000 Upgrade
- Unexpected sawdust creation
- Chainsaw envy!!
- Chuck insert does not run true
- Danish Oil in large quantities/soaking
- Just finished
- inside sanding
- Natural Edge Bowl: What type of wood is this?
- Suggestions for large turning
- Tell me your experience with G0766
- Suggestions for platter
- HF Dust Collector Bags?
- Lacquer finish on sea urchin ornaments
- Tell me about shellac....?
- Opinions please.
- piercing tool repair
- 14" x4" walnut bowl
- Morning over here.
- Taper Shank drill bits at the lathe
- Inherited a Beaver lathe.
- casting blanks
- interesting wood that looks...blah
- Mineral Oil
- live in wickenburg AZ?
- What kind of wood is this
- Value of a Yates American J-170
- Using round nosed scraper at sharp angle ?
- Interesting Shape On This One
- magnolia wood
- Spalted Big Leaf Maple Vase
- When less is more
- hurricane 125 limitations on big bowls
- 13ft chainsaw!! cutting old salvaged redwood
- New wood. !!
- Dill-DeGroot Swamp Bug
- Well, I've fallen down the slippery slope of turning
- Saw the Laguna 18/36 at Rockler's today
- Neighbor's fire wood...now what?
- Laguna bandsaw question
- Oak is so pretty :)
- New wood to me.
- Looking for a small chuck
- Preserving box elder for future turning
- McNaughton Coring System
- Distorting a dry turned bowl...posssible?
- previous posting that i can't find
- New Lathe Question
- Tailstock Upgrade
- Two questions: which tool and safety
- Walnut bowls with lids
- Something different
- Bird houses
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.