Originally Posted by
derek labian
Are you talking about the X-50? I hadn't seen this before, but how will you process a 4x8 sheet on it? or are you talking about processing a section of a 4x8 at a time?
Open ended machines can process longer materials through tiling...you cut a section and index it, move the material and cut the next tile for as many as it takes. This is valid on the Camaster and AVID machines we've discussed with you, too. That's a big advantage of an open ended CNC setup and Vectric's software supports it very nicely.
--
The most expensive tool is the one you buy "cheaply" and often...