Hi all, I don't look often, but when I do it seems there are absolutely no used mortising machines out there. Something I've always wanted (someday) was a knee mill. There's a place near me that has had a Cincinnati Contour Master for sale forever (years and years). They re build these...
Last Post By: Wes Grass Today, 1:49 AMHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 9:57 AMAbout a year ago I was reading and found that Vietnam veterans qualified for VA medical benefits. About the same time, I was talking with a neighbor who came over to ask me about hearing aids. I have bimodal hearing; I have a cochlear implant (CI) on one ear and a hearing aid (Ha)on the other ear...
Last Post By: Mike Henderson Today, 11:09 AMIn my small shop most things are kept in drawers and anything like packaging is turfed out rather than claiming space. Tools like drills share bits etc with other drills and are easily accessed from drawers. If my router lived in a Systainer the accessories would have to live elsewhere, at least...
Last Post By: Michael Burnside Today, 11:23 AMDue to health reasons, I can no longer use my shop, I'll be selling everything starting with my Lathe tools and the Powermatic 3520B: Woodcutter coring tool W/laser. $350 Sorby texturing tools - the complete set W/ micro set. $250 Sorby captive ring tool set (3 pc.) $60 Elbow hollowing tool W/...
Last Post By: James Tibbetts Today, 3:43 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Carleton McLendon Rare Woods and Veneers - metro Atlanta
https://www.rarewoodsandveneers.com/
My go to and favorite handle is one made by Stuart Batty that was purchased at Woodworkers Emporium years ago. It's made out of some composite material
Steve Mathews Today, 3:50 PMMy friend sent me this link > https://www.norbert.de/index.php?id=10 < It is a 24/7 broadcast of various recordings people have sent in. He said
Jim Koepke Today, 3:18 PMA slick has rocker.
Backside is not dead flat, as a chisel's should be.
Even though the socket is essentially inline with the blade as a chisel's
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Today, 12:22 PM