Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something.
I ran across this in a magazine ad.
The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Has been restocked..
Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox...
Eight 1 x 6 x 6'
Five 1 x 4 x 6'
And he threw in a stack of shorts
And a 3/4" x 8" x 39" slab..
About a year ago I was reading and found that Vietnam veterans qualified for VA medical benefits. About the same time, I was talking with a neighbor who came over to ask me about hearing aids. I have bimodal hearing; I have a cochlear implant (CI) on one ear and a hearing aid (Ha)on the other ear...
Hi, Everyone. I dearly love this forum, although I have not posted in a long time. You folks are so knowledgeable and always have such great suggestions.
Here is my situation. I make a small music accessory and need to build my own saw. Without going into all the details, I've been searching for...
One member includes a list of favorite things, one of which is the Oxford Comma.
In my early years of education, teachers taught us to use a comma before and in a list of items. In later years, this seemed to drop out of favor. Could it have been the difference due to some teachers having moved...
I've got a 23 HP diesel Kioti tractor, 3 years old. As I was operating the backhoe at about 1/2 throttle, the engine suddenly over revved, smoked for less than 10 seconds and then died. I checked all fluids, temps, etc looked over the engine for any obvious problem and all was fine. To my...
That saw is a lapidary unit. Diamonds are merely rocks, chuckle. I would look at what is available for lapidary. Then check local rock and gem clubs for
Oak has tannins that will cause iron to rust. Simply put something under the tools. For instance you could make a tray and put a microfiber cloth in it
After I have face and edge joint a board and plane the opposing face flat, I like to flip the board and run the jointed face thru just to make absolutely
Sections
Recent Articles
Recent Article Comments Widget
Recent Polls
Recent Blog Posts
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Kevin Jenness Today, 9:51 AM