- Bora-care application rate
- Fresh Sawn Cherry
- Mobile sawyer in central Pennsylvania?
- Buying old air dried boards
- Milling disaster waiting to happen...
- How to Dry Small Pieces of Mulberry
- Couple gets LT-15 to build home
- First time sawyer, have koa, don't want to mess up.
- Advice on a recently cut down Pear Tree
- Should I mill a large sycamore tree?
- Big Poplar Trees - What to do?
- Pre-Florence Takedown . . .
- measuring air flow?
- when to change teeth on circular sawmill blade
- I need 520LF of fir timbers...
- First slab - now what....
- Post Oak? Should I mill?
- Questions concerning a large oak tree
- Norway Maple
- a little Sassafras
- timbers on circular sawmill half inch smaller on trailing end
- How many sqft of flooring can I get out of these logs?
- Sawmill suggestions
- Port Orford Cedar
- Wood Sterilization
- Dropping a white pine - Sap concern / timing?
- Show me your solar kiln
- Bidding war.
- Drying small wood slices
- checking, can I stop it
- Quick Release Tail Vise Disadvantages
- Looking for ideas on Dehumidification kild
- Saw setter
- Forestry trailer- new toy
- I got free logs. Now what?
- Kiln Drying or air drying Cherry wood
- Do you weight down your lumber?
- to good to be true - useable wood
- Did I just pickup some firewood?
- Storing Wood Outdoors
- Hickory useable?
- Anyone within ~100 miles of Boston?
- At what point is it “worth it” to have your own mill?
- Anyone buy walnut logs lately?
- Drying a big white pine cookie
- Sawmill Purchase
- Wood-Mizer LT 15 Wide
- Silver maple limbs in Norcal / worth it?
- Drying black walnut????
- glazing for solar kiln
- heater for small sterilization kiln?
- 3 inch oak not completly dried
- 80" bar chainsaw mill?
- Can I debark this before drying
- Rough Cut and Then Store?
- maple log for riving
- Woodpecker holes - sign of bugs?
- Ideas for Bandsaw sled
- Buckeye wood
- Looking for Kiln near Seattle
- Vacuum kiln drying knowledge
- Insects in wood
- using a bandsaw for cuting small-log boards
- Advise needed, drying sunburst locust
- Looking for a good hardwood seller in Chattanooga, TN
- Widening a sawmill
- Bandmill base question and sawing pine
- "Wet" sterilizing green wood?
- Moisture meters
- You guys ever see an Phoenix wood kiln?
- The horror!
- Indian Rosewood milling
- Douglas Fir Posts - Movement/Cracking
- What wood is this?
- A Walnut Logs to Mill
- Advice needed....spalted maple
- My air drying white pine stack got a little wet. Will it be ok?
- would an Echo CS590 be able to be used as a chainsaw mill?
- Bug extermination questions
- Storing walnut and white oak outside
- Need help with walnut milling in MontCo PA
- I'm in the game
- Entry level mills
- Putting together the Woodland Mills HM-130 Mill and Woodlander Trailer
- Mold on stickers
- Black walnut slabs
- Solar powered fan for small kiln
- Milling for Shares - What's Fair?
- 40’ Japanese maple in South Orange NJ needs removed, anyone out that way?
- Drying Pressure Treated Lumber
- Drying wood in the oven
- Dan Cassens interview
- Pecan log
- Finished my Solar Lumber Drier Today
- Dehydration kilns and powderpost beetles
- Hobbyist dehumidification/sterilization kiln questions
- Dark blue to black stains on fresh cut lumber.
- Milling Service in Bay Area Norcal? Osage Orange Log
- Milling 25 Year Old Logs
- Anyone flatten slabs after drying on their mill?
- Woodmizer Bandmill- My Helpfull Water Jug Suggestion
- Slabbing This Weekend
- Timberking 2000 V1 Computer Setworks Testing / Rebuilding
- Setting up for Milling
- Slabbing in KC
- Does this make sense?
- Southern Magnolia
- Country Maple
- Metal Detectors for milling
- Fresh cut cherry crotch, what should i do now?
- Point me to plans for building a kiln drying shed
- Building lumber kiln
- Red oak or white oak
- cute sawmill
- circle sawn look
- In need of milling for 17 foot white oak log with 48" diameter (beautiful)!!
- Lumber storage
- drying 12/4 white oak
- Looking for sawmill in my area to cut some osage
- Vacuum Kiln questions
- Anybody using either a Dakin Flather or Simonds Red Streak bandsaw blade?
- I have a new mold issue in my firewood kiln
- Help deciding between mini-Ligno meters
- Small pieces of Black Walnut
- black walnut - glittery?
- Walnut Log help
- Lower than expected moisture reading
- Old growth southern yellow pine
- Cutting rounds by hand
- Oldest family owned sawmill in Texas.
- milling and drying an old walnut beam
- Air dried wood seems too dry
- Stickering or NOT with dry rough sawn planks
- Best time of year to buy hardwoods?
- Quarter Sawing Red Oak
- Need advise on winch set up
- Solar Kiln Drying Rate
- question about oak
- Mobile Milling
- question about wood species
- How to store downed trees for future veneer/turning?
- Stand up Chainsaw mill
- Lt40
- Alaskan Milling
- What is the simplest way to heat sterilize wood
- Large black walnut trees coming down: Bay Area
- Where to get blades?
- Advice on sappy wood
- Boards are checking, still usable?
- Well that was fun
- Looking for Information on a Sawmill
- Logs to lumber by hand?
- Air Drying Walnut
- trailer boards
- Hurricane Trees
- This Really Was Fun
- Fair price for black ash and birch?
- Extending the Season of my Solar Kiln
- Faults in Sapele lumber?
- First time for everything
- Air drying in basement shop
- "Most valuable" walnut cuts
- Black Locust
- How did I miss this subforum starting?
- Chainsaw bar oiling
- Solar kiln
- Kiln Drying Cypress Planks for Near-Term Use
- laguna timber master
- Mold on end grain
- Pest invasion
- Air drying ash
- Oak in Oregon
- Sanitizing Wood??
- Getting heavy logs into pickup truck.
- Portable sawmill operator near Albany, NY
- Drying/curing log sections - insights for just getting started?
- American-Made sawmills vs Chinese-Made
- School me on air drying chair parts to be steam bent later please
- Bandits
- Air-drying tamarack
- Worms Holes and the Worms that Made Them
- is this a dumb idea?
- Hickory diseased?
- Jacaranda insights please
- Logmaster FM 1 information
- Boxwood and other dense woods in wax. Help.
- Ever seen green in walnut?
- A little Flaming Box Elder
- A New Dehumidification Kiln
- What we won't do for Walnut
- Stolen sawmill
- Drying Rosebush Wood *Corrected
- Pine, is it worth it?
- Stickers? I stopped to check out some slabs
- How hard would it be to build a kiln just to kill powder post beetles?
- More trouble than it's worth?
- Beginners Question on Waiting Time Before Milling
- Vacuum kilns
- How to purchase SYP logs
- Long term outdoor storage of rough sawn oak
- Kiln drying cost
- David and Goliath
- Heater for dehumidification kiln
- Turning a Woodmizer LT10 into a stationary resaw
- Radiata Pine Movement Value?
- heat treating walnut (and other species)
- Log identification
- Buying Lumber from Sawmill?
- California Black Walnut?
- Where to buy stickers
- Snowy Walnut
- Idry kiln
- Ordered a Sawmill
- First Time Milling Basswood
- Silver maple wood worth anything?
- SW VA - looking for 5/4 cedar
- RipSaw
- Cutting speed WoodMizer LT 70 Vs Swingblade sawmill
- Board Foot Capacity of Solar Kiln ?
- Taking this Walnut today
- Any experienced Mesquite DH Kiln Operators?
- Kiln drying to kill powder post beetles
- RIP Danny Hamsley
- Portable Sawyer near Rockland County, NY?
- I just love clear Walnut
- Air dried walnut ready to use?
- Searching QSWO
- Converting a Woodmizer LT70 to Natural Gas ??
- Average cost per BD FT to have Red Oak Kiln dried
- Particles inside sapele
- How to dry Apple and Red Oak
- Weight of Eastern Hemlock Log
- Palmer Hygrometer
- What to do with a lot of Eastern Red Cedar
- Air dired Walnut in PNW
- Amish made Timber Buddy Sawmill
- Sawing HUGE logs
- Maple trees down
- Very large walnut slabs
- Dealing with wind-curved trees?
- Thickness of hardwood for woodwork?
- Let the 2023 Milling Season Begin
- A beautiful day to unload the solar drier
- Adding some ripping capacity to my mill
- Houston, we have a Problem
- Maples to be taken down - Wood is available for free
- Dehumidication kiln and insect life
- Protecting log during multi week slabbing
- 2 x 4's
- What dimensions to mill to?