View Full Version : Neanderthal Haven
- Anyone recognize this fella?
- Shortening hand saws
- Favorite Western hand/panel saws
- Fell down the slippery slope
- A chip breaker reminder
- My signature half back, maybe
- Spokeshaves: Wooden with brass wear strip vs. razor edge style
- Saw Gloat
- three blades, three chipbreakers, one plane.
- Anyone been to Hachimanti, Iwate, Japan?
- Semi Gloat. Stanley, No. 78 and No.80
- Small smooth plane?
- Microbevel or not
- Curved and flat in the same adze !
- Oil Stone Identification help?
- Technically a hand tool: Bernzomatic Socket Set...
- Recreate a molding
- Shapton 320 or Chosera 400?
- Stanley 4 1/2 Restoration
- End Grain Tearout Woes on the Shooting Board
- Millers Falls No. 5A replacement chuck
- Millers Falls Chuck conundrum
- Where should the dogholes go?
- All Neander Curly Maple Chest
- Jig / Fixture for Planing Inset Drawers to Size
- Inexpensive tool --- 3/16" thick steel for grinding up?
- Low Angle Jointer vs. Traditional Jointer For Shooting End Grain
- Popular Woodworking subscription scam?
- chisel quality
- Sharpening for a school shop
- New saw questions.
- Is a jointer a must have?
- Your Favorite closed tote
- Stones for sharpening profiled tools. . .
- New chisels? Soft? Why?
- Chopping Chisels
- My next purchase should be...?
- Spring Steel, files, Rockwell etc??
- Just a Thought for Christmas
- George Wilson inspired hammers II
- Old wood hollow plane mfg id?
- Narex classic bevel edge chisels
- a Sargent 306?
- Today's Epiphany With the Stanley 45
- Sandpaper and Plane Blades?
- Adjust-A-Bench Legs for a workbench
- Ugly chisel handle
- Now I have a tenon saw
- Hand plane newbie
- FFFFRRRRRREEEEEEEEEEE Shipping
- To flatten my LN bronze block plane, or not.
- Two Questions on Workbench Features
- Sharpening options for a new-to-me dovetail saw? Opinions?
- Thanks Mrs. Claus .........
- LV For Christmas!
- Need Help vise Screw?
- School of Woodworking in Elm Mott, TX
- A workbench for my daughter
- Gramercy or Knew concepts saw?
- Results/questions after first use on Naniwa Chosera stones
- Rethinking this Neander thing
- Nameless keyless chuck?
- What do I use to hit a froe?
- Large try square needed, so
- How do you get rid of tailed tools?
- Wooden Spoons, Easy Benchtop Shave Horse
- Two of the LV surface clamps . . . what would you do?
- Wooden handles for antique vise?
- Stanley 45 Skate Mismatch
- How many use a panel gauge?
- Cambered block plane?
- Moxon vice and bench on bench
- Some new saws
- Auger Bit Quality
- wood plane.
- By way of Dog Sled (USPS)
- tools needed for plane making
- Stanley 2101A problem
- Question on a technique mentioned in The Essential Woodworker
- A Family Portrait
- An easier way to wet end grain when cutting
- First Bent Back Infill Mitre Plane
- Making spoons
- Saw Intervention
- Fluted columns without a lathe?
- wooden plane grain orientation? Stock size?
- I like Olive Wood
- Neat wooden spoon video
- Can I see your wagon vise?
- Millers Falls mitre box
- The sharpening Desk?
- Stones from Stu...
- adhesive for bonding waterstones to a backer?
- block plane question
- cheeks and shoulders
- Waterstone trays, sink bridges, etc . . .
- Veritas grinding jig
- backsaw differences between price points
- First New Plane
- Bad Axe saws worth it? Anyone try Winsor saws?
- veritas saw filing guide - have you seen it?
- Non-card scraping
- One down, two to go
- Sharpening with King Stones: Advice Needed
- New Article Subject?
- Where it find. Help with my drawers.
- A plane question..
- Floats versus rasps versus files
- Lie Nielsen Workbench vise handles
- dovetail saw
- Experience with sassafras?
- To soak or not to soak...That is the question...
- Carruth Ultimate Scraper
- Another Plane Blade Sharpening Question
- How about an Aluminum Kanaban?
- My kids are carving
- My bench build
- PM-V11 chisels...
- My New Miter Jack Shooting Board
- Plane crack
- Static Buildup
- Dado Plane
- Trying to get two irons sharp...
- A2 or O1 Steel?
- New cabinet scraper
- Oil stones and Japanese chisels?
- Stanley 48 knob interchangeability
- Laying out dovetails - rough guidelines ????
- Making friends with the local smith
- Mortise Chisels verses standard
- Bench building questions: attaching top to base? mounting tail vise on a short bench?
- Stanley 358 Miter Saw
- Looking for opinions/suggestions for dogholes
- nitty gritty
- Obscure plane
- Foot powered mortiser chisels
- Post production roubo build thread
- Jointing a card scraper
- waterstone questions… please
- Beginner dovetail glue up/planing question
- Vise Location - Joinery Bench
- Chisel style for chopping dovetail waste?
- Waterstones - ID?
- Bow saw advice?
- Any experience with the Wenzloff panel saws sold by Lee Valley?
- Zach Dillinger Is A Very Impressive Woodworker
- Seen at the local "store"
- new guy
- Economics of planemaking in the 19th century
- Needed to unwind, after a BAD day..
- Stock O1 steel - how to cut?
- Smaller bent back mitre plane
- japanese tansu - mystery groove in carcass?
- are any of these good deals?
- Hear one of the guitars I made
- Shop helper at work...
- Curly Maple Clock
- Dry grinder usage
- Lubrication of dovetail saws?
- How long does plane blade last between touching up.
- Alignment pins for drawbore pins
- Stanley 358 Mitre box and back saw
- Dovetail practice
- Holdfast?
- Wheeler Madden Clemson #999 Saw
- Tips on restoring a Sandusky jointer plane?
- FreeStuff Drawing - Low-Angle Jack plane with PM-V11 blade
- Feedback on value for old combination planes
- Order of Operations in Case Work
- New use for old dresser??
- Help me spend $800-1000 on hand tools
- First Shavings
- PM-V11 chisel handle question
- wedged tenon
- Bessey Parallel Clamp Warranty
- Old plane
- Lee Valley gets me again . . .
- Problems with my honing
- "cooking" raw linseed oil
- Advice needed on giving up electrons
- Boards for practicing ball and claw.
- Back saw technique
- Hand Planes 101
- How much to pay for wooden plow plane irons? Plow plane stock thickness?
- Repeatable Secondary Bevels With an Eclipse Guide, or a Different Ruler Trick
- Does the #4 Veritas Smoothing Plane have enough length.
- Order of operations
- New Acquisition
- Need durable hardwood that is workable with hand tools
- Bow Saws
- Stair/Dado saw question
- Wood screw threads
- High Angle Frog
- High angle frog and primary bevel
- Is this plane worth tuning?
- Dry grinder upgrades
- Vise from my local CL
- Is It Possible to Slow Down a Grinder's Speed?
- H C Marsh Miter Box
- Is this OUR George Wilson??? Great luthier video!
- Need help with a Fulton Special brace
- A hand saw made for or by Sickels & Nutting Co, Iowa?
- Folding Lumber Racks
- Tips for cutting the top off a box with a handsaw
- Low Angle Jack Plane Irons
- Had to flatten a plank, by hand
- Scary Sharp on "new" hand planes
- Anyone use the Nezumi chisels?
- Question on flatness out of lunchbox planer, derusting a #7, and just venting.
- A visit to the Lee Valley store in Ottawa
- Three Moons Rising
- Scrape or Plane after initial glue up
- question on belt grinders
- George Scherr Toolchest Info
- Daughter's first joint...
- Tried out a Underhill style of thing..
- Places for tools in Brussels?
- Making small dowels?
- Any Neanders in the Provo Utah area?
- Dried Hide Glue, will a hair dryer soften it?
- Kerf Saw for Guiding Re-Sawing
- Global Components?
- Looking for information on checkering, as in rifle checkering
- Is this antique multi-plane worth restration attempt?
- Does LV low angle smoother work well for shooting miters?
- Oops!
- words fail me ...
- Introduction
- A Road hazard Restored
- fixing the chatter in my filletster plane
- Needed to make a few mortises..
- Tail Vise Quandary
- Speaking of Holdfasts!
- Fixing my hammer . . .
- ready to buy a set of stones !
- #3 vs. #4 bench plane
- Molding Plane Tune-up Question
- Wood shavings porn
- Shapton Glasstones -- out of favor?
- A plane I made as a retirement gift
- Help with identification...
- Are 23" miters possible????
- Uses for a Shoulder Plane
- Veritas Spokeshave w/PM-V11?
- Why So Few Strike-Through Chisels?
- Need a good square... Not Starrett.
- Small Precision Neander Work.... (help!)
- Overtightened Scissors
- Another project that took too long...
- Couple of Siamese hammer heads
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.