Hi All,
I recently bought a 2nd hand 1999 Universal Laser System (ULS) M-30 out of Craigslist here in Seattle Wa. I've enjoyed reading many of the threads here. They have got me to this point. Now I need some help. Thanks in advance :-)
Now what is happening: I send the file to the M30 laser from Inscape. I see the file on the Laser’s Display. I press “Start”. It runs as if the laser is working but it is not.
Do you have any thoughts or suggestions on what I can try with my Laser to get it working?
Note: If you would like a photo or video just let me know :-)
Notes:
- The label on the back of the Laser says it is a “M30 Made in 1999”. But the Laser Display says it is a M-300. I’m using the “M-300” printer. I have it set to the default printer. Not the “M30Laser” Printer. Both are available to choose from.
- I am using a Lenovo Laptop running Windows 10 Home 64bit
- Using Inkscape v1.3.2
- ULS Windows Driver version: (C) ULS 2015-05-20 XP/Vista/7/8 V1.10 N
- Found in the inscape -> Print Window -> Preferences
- From the ULS M30 Laser’s Display:
- Preferences -> About
- UNIVERSAL LASER SYS
- COPYRIGHT ULS 2001
- M-300 AF
- VERSION V23-21-14-09