Originally Posted by
Chris Parks
Has anyone fitted a DRO to the K3 Hammer outrigger cross cut fence.
A good thread dredge. Since my question I have managed to fit a DRO to the cross cut fence on my K3. There is a very good thread on the Felder forum showing a lot of very good methods of adding cheap and accurate DRO's to cross cut fences on Felder/Hammer sliders and anyone interested should take a look. The DRO's available from Chinese sources these days are under $100 and can be fitted to any machine with a bit of ingenuity.
Chris
Everything I like is either illegal, immoral or fattening