I'm looking at either the Laguna Revo 12/16 or a Rikon Midi (the 70-220VSR and 70-150VSR) as a first lathe. They're both about the same price in my area. (The only other easily-accessible option is King Canada/King Industrial, which tends to be very low-quality. Can anyone recommend one over the other? I have a small Rikon bandsaw of decent (but not overwhelming quality). I have no experience with Laguna. I have no plans to focus on any particular kind of turning, as I have no experience, but I'd like something that I can use for small bowls, chair spindles, etc. I lean slightly toward the Rikon because of the longer distance between centres (20" vs. 16"), but I'd prefer quality over capacity – I am rarely likely to use the extra few inches.