Quote Originally Posted by Dave Sabo View Post
They're a bit cheeky with the price. They aren't even doing a full weld on that, and are using cheap standard caulk. Seems like they're telling you they can't be bothered.


If that's the design , no need for those guys. Grab some 1/4" ply and 4 or 5 or better yet a 6" quick connect fitting and make your own. Less than an hour fab time and under 20 bucks in material.
What Dave said. Thats what I did and attached with rare earth magnets and a thin gasket as I didn't want to drill holes to mount to my PM 60 8" jointer nor scratch the paint. I use 5" ducting to it and works great, been running that way for about 5 years now, no backup of material at all. Have 1.75 hp blower with 5" ducting to all machines. Randy