Hi,
Planning to build a workbench that will serve multiple purposes:
-Assembly table as the top will be a torsion box (mdf and plywood for the webbing)
-Outfeed table for sliding table saw, supporting off cut only
-Drawers for organization/storage
I already mix many plans I saw online to end up with the idea of this table. However, I am wondering how useful to include tracks on the top. I will be able to use bar clamps as the drawers part will be offset by 2 inches from the top edge on all four edges. I already have a lot of bar clamps so I do need to invest in new clamps.
Looking at tracks, I see people using a lot of dedicated clamps and other nice stuff that are really expensive and not compatible among different track brands.
So I am wondering how useful are those expensive track tools/jigs.
Thanks for your feedback,