Yes. And internal to the saw there is flex hose that squeezes down before reaching the lower shroud below the blade. So some restriction there as well.
I will try some airflow improvements.
Also not the saw has a riving knife mounted guard that came with it. It is quite narrow, and 2.5" port - did not do a very good job of it to be honest, so needing something more.
I see that sharkguard mounts to the riving knife. On their website they show an example hooked to a 4" hose, which seems attractive. But I have the riving knife off the saw fairly regularly... was leaning towards the overhead mount. Has anyone mounted it via overhead?