Thanks in advance, again.
I'm fumbling through my first real shop project and hit a stumbling block.
BTW, it's a flip top tool stand with a bottom drawer.
Anyhow, I made a mistake and had to modify the drawer on the bottom.
Instead of rebuilding the drawer, I continued.
The problem is I, now, only have 1/4" on each side between the drawer and cabinet side.
The slides I bought (cheap ones) won't fit.
Are there slides made that will fit?
I'm guessing I could take some 1/4" wood and make wooden slides?
A different question.
One side of the table will be for my miter saw.
Undecided on the other side.
Leaning to putting my router table which would free up the floor space my quick and dirty router table stand sits now.
The other possibilities would be a jointer or, possibly, my drill press