Currently have a Powermatic 1500 bandsaw that I use solely for thin blades, 1/4" 3/16" etc. I have a MM24 for resawing.
When running very thin blades, the roller guides are not very useful, blade jumps out continually. I have adjusted them perfectly but there is not enough surface for the rollers to be of real use.
Lately I've been creating some bandsaw boxes.
I hear a lot about ceramic guides.
Honestly, was thinking about selling the PM1500 and possibly getting something like the Felder 510 with ceramic guides.
Does anyone have any advice on a med power model (no bench tops) that will allow me to use a thin blade and make accurate cuts.