Good morning all,
My workplace is interested in replacing the tablesaw in the facilities/maintenance department.
The shop is required to deal with a wide variety of tasks, and the saw will be used for all kinds of things, by a variety of operators, from ripping wet pt framing, to sizing plywood, to making cabinetry and furniture.
As I understand it 3 phase is available if required.
There is no room for a slider.
It is unlikely that a used machine will be considered for purchase.
Dust extraction is a big issue, so an enclosed base/cabinet saw, left tilt?, 3 - 5 hp?, 10 or 12”?
A riving knife, useable/rational guard system.
I'm not sure as to the budget, but it is a public institution, so they will be wanting to get the best value for your dollar they can, and I'm trying to squeeze a hollow chisel morticer out of this too.
Should safety features bubble to the top of the alchemical purchasing cauldron then as far as I know Sawstop is the only game in town and that will be that, but orderwise any suggestions would very welcome.
Cheers in advance
CH