I am wondering if someone with a Hunter Osprey hollowing tool or a Hunter#3 full Swan Neck Hollowing tool could provide me with some information.
From the Hunter website pictures it appears that the tip of the Hunter Osprey HT is tilted forward. I'm wondering if someone with that tool could provide me with that angle?
Also, the Swan Neck tool appears to be tilted counter clockwise (from the handle end) by perhaps 30 or 40 degrees. I would appreciate if someone could measure that angle for me.
Finally, I'm wondering what the cutting or control difference is between tilting the cutter forward versus tilting it sideways?
Thanks in advance to those who may be able to respond.