Well it's off to Toronto tomorrow to pick up my new Ray Fine 7050. The four hour drive is normally not bad, but I have a feeling it will seem like forever tomorrow. Looking forward to the new toy being up and running soon.
Lyle
Well it's off to Toronto tomorrow to pick up my new Ray Fine 7050. The four hour drive is normally not bad, but I have a feeling it will seem like forever tomorrow. Looking forward to the new toy being up and running soon.
Lyle
Lyle Cheredaryk
Ray Fine 7050-80w EFR
3 Jaw rotary
4 Wheel rotary
RDWorks 8.01.18
CorelDraw 8
Windows 7 & 8.1
Hey Lyle .... great news !!!!!!!!!!!!!!!
Brian
Ray Fine 6040 80W RF Tube
Chuck Style Rotary
5000 CW Chiller
I hope for your sake all the paper work has been taken care of, and its cleared your customs.... otherwise I would take an over night bag and extra cash.
Is your truck or trailer big enough? I remember the time I ordered something, a off road kart or the like and I usually do the pickup at the terminal so I can have it on a low trailer, easy to unload. For some reason, I said just delver to my house... darn thing was nearly as wide as the semi truck trailer, No way could I have gotten on my trailer or pickup!
Last edited by Bill George; 05-29-2017 at 5:17 PM.
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
Not sure if my truck is going to be big enough, Just a 1/2 ton and 4 ft. wide between the wheels. I am bringing a low-slung trailer just in case.
Worst case scenario I rip the packing crate apart, with the tools I am bringing just in case, and load it that way. I have tarps as well as tie downs.
You can never be too prepared.
I do have all the paperwork including the customs forms. Hopefully it goes well.
Lyle
Last edited by Lyle Cheredaryk; 05-29-2017 at 5:25 PM.
Lyle Cheredaryk
Ray Fine 7050-80w EFR
3 Jaw rotary
4 Wheel rotary
RDWorks 8.01.18
CorelDraw 8
Windows 7 & 8.1
My old quote says 45" width. Probably right. But it should be easier to put on trailer. Good luck!
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
It's on the truck and about halfway home. Then to unload it and get it inside. Gonna be a long day.20170530_132152.jpg
Lyle Cheredaryk
Ray Fine 7050-80w EFR
3 Jaw rotary
4 Wheel rotary
RDWorks 8.01.18
CorelDraw 8
Windows 7 & 8.1
But such a fun day
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
In the end, would it have fit into your truck OK?
700mm x 500mm Ke Hui KH-7050 Laser
80W EFR F2
S&A CW5000 chiller
Chuck style of rotary attachment
Doug, it would not have fit in the truck. It barely fit on the trailer. Thought we might have to take it out of the crate for the trip.
That's what you get for being a smart-ass and ordering all the extra stuff with it. It's all good now though. At home and in the shed. Now to go over it with a fine tooth comb and tighten everything.
Lyle
Lyle Cheredaryk
Ray Fine 7050-80w EFR
3 Jaw rotary
4 Wheel rotary
RDWorks 8.01.18
CorelDraw 8
Windows 7 & 8.1
20170530_132102.jpg20170530_132055.jpg20170530_190236.jpgSafely off the trailer and in the driveway here. Rolled over a couple of sheets of 3/4" plywood to the ramp into the shed. Going to camp tomorrow so no work on the laser. Hopefully next day.
Lyle
Lyle Cheredaryk
Ray Fine 7050-80w EFR
3 Jaw rotary
4 Wheel rotary
RDWorks 8.01.18
CorelDraw 8
Windows 7 & 8.1
>>Now to go over it with a fine tooth comb and tighten everything.<<
Ah, yes. The intoxicating smell of cheap Chinese plastic tubing and lubricants as you open up the crate. I remember it like it was yester...uh... 9 months ago.
You do realize the Chinese writing on the side of the crate says, "Defective - do not ship"? Juuuust kidding. Have fun with the new toy.
700mm x 500mm Ke Hui KH-7050 Laser
80W EFR F2
S&A CW5000 chiller
Chuck style of rotary attachment
Congrats Lyle!
Kehui 100w 900x600 with adjustable z axis table,
3 jaw chuck rotary
CW 5000 water chiller
English version RdWorks V8.01.28, ( newest version )
Windows 7 & 10
Corel Suite X8
30w Fiber Laser with Raycus power source
rotary and other fun toys I know nothing about yet...lol
You know That really is a . Big crate. but I forget that all accessories are outside the machine rather 5han inside like with the 1390.
Have fun!
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others