Back in my trade show days, guys would come up the the MM16 we had in the booth, tug on the 1" blade (as if they were tying down the load on a flatbed truck and wanted to make sure it straps were all tight; is that the bandsaw shoppers' equivalent of kicking a car's tires?), then proclaim, "Now THAT'S a resaw!". This was always a little funny because after you're around them for a while, none of our bandsaws really seemed that big at all.
The guys in our shop were doing a blade change on the big McDonough we use for ripping planks and for the first time in my life, I said to myself, "Now THAT'S a resaw!"
IMG_2679.jpg
IMG_2678.jpg
Erik