Hi guys,
Pls observe the spalted maple wife is making into handheld mirror.
The below is 3/4", her final preferred thickness is coming in around 7/16"......
What would be the best to fill the holes with something clear, that will be hard, can be worked, and put poly on the entire thing?
Maybe just not fill holes? Coat them thoroughly with the poly (I think her preferred finish)?
I have this: its about 5 years old, have never used it.
DSCN0586.JPG
Also, of course, have all the BORG 2 part epoxys, and plenty of them.....
What you all think?
As always, thanks!