Haven't posted anything here in quite a while. Thought I would share a little something I made for my cousin's son and newborn girl. I used Rowmark's new hardwood collection (cherry).
nightlights_combined.jpg
Haven't posted anything here in quite a while. Thought I would share a little something I made for my cousin's son and newborn girl. I used Rowmark's new hardwood collection (cherry).
nightlights_combined.jpg
Epilog 35 Watt Mini 12" x 24"
New Hermes V3400
Kwikprint 55
CorelDraw 2017, Illustrator, Photoshop
Those are very nice looking awesome. I seen some on Youtube i like to try one day once i get brave enough to try other than wood and mirror and drinking glasses. Thanks for sharing Here is the link to the. https://www.youtube.com/watch?v=iU3CXF8siJs
STILL A NEWBY LEARNING MY WAY
Junior Hall
Boss laser
engravelab 9v
Well done, Liesl. Thanks for posting the pictures.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
they are very nice
here are a few of my nightlights, they are all free standing with120V adapter
greetings
waltfl
Wow those look awesome Walter!
Epilog 35 Watt Mini 12" x 24"
New Hermes V3400
Kwikprint 55
CorelDraw 2017, Illustrator, Photoshop
Walter you are so talented.
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
All i can say is wow awesome i need to pick my jaw up off the floor now What are they made out of plexiglass or what. I just need to get started more and start doing more things as i haVe all kinds of ideas but kinda scared ill screw some thing up
AWESOME AWESOME AWESOME nightlights to all thanks for sharing
STILL A NEWBY LEARNING MY WAY
Junior Hall
Boss laser
engravelab 9v
hi all
the picture is the 2.4mm acrylate what I get left overs from ACE hardware store for free. the LED light stand are three pieces of different wood ( red cedar and bass wood) they are cut to the size what is needed and after installing the LED strip glued together.
if some body is interested send me a PM for the picture I am using lasercad v. 7.43 its for the AWC 608 DSP controller.
greetings
waltfl
Walter, do you get the led strips from a particular supplier or just get them off ebay?
It really sets them off. Great job.
Gozzie
Thunder Laser MARS 90 (130 watt)
RD Works V8
1 Phillips Screwdriver
1 Straight Edge
1 Hammer
1 Dull Chisel
1 Pencil Sharpener (manually operated)
hi gozzie
I buy mostly rolls of the LED strips from the cheapest seller on ebay, because they all from the same manufacturer.
right now I use the new remote control for the strips and they work wonderfull because I can adjust so many things light brightness , speed end even flashing.
price wise its the same as a conventional switch.
greetings
walt
I have bought several LED strips and also water proof LED lights and cuttable sections from several of these places Hope this helps see the following
http://www.elumanation.com/index.html
http://www.lumenedge.com/store/index...od&productId=1
http://search.yahoo.com/search;_ylt=...&fr2=rs-bottom
https://www.superbrightleds.com/cat/...+Bars+&+Strips
STILL A NEWBY LEARNING MY WAY
Junior Hall
Boss laser
engravelab 9v
hi junioe
they are way to expensive. I pay for 5m roll super bright 5050 LED strips only $ 9.00 including shipping.
greetings
waltfl
Liesl Dexheimer
What did you use to keep the wood on the light it self
Walter i think your EBay is a lot cheaper than i realized thanks
STILL A NEWBY LEARNING MY WAY
Junior Hall
Boss laser
engravelab 9v
Junior try Super Glue
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander