Just wanted to get an idea if anyone has experience of larger frame saws for rip and/or crosscut work? I have been thinking of making one, but wanted to know whether this is a worthwhile endeavour?
Just wanted to get an idea if anyone has experience of larger frame saws for rip and/or crosscut work? I have been thinking of making one, but wanted to know whether this is a worthwhile endeavour?
Worth it for softer woods.
Not worth it for harder stuff between oak and bubinga.
For those it is bandsaw time or have a full time apprentice hanging around who works for free to grab holt of the other end of a two man saw (women are too smart to do this any more ). Even then it is slow going, you need a pit to resaw long stuff (8 foot or 10 foot long etc), and there are other problems.
Some one will add their good idea about the kerfing saw. That is cool. I have not tried that yet.
Last edited by Winton Applegate; 07-23-2013 at 8:51 PM. Reason: pit for long lengths
Sharpening is Facetating.Good enough is good enoughButBetter is Better.
I say do it if you like making your own tools and don't mind a learning curve when if comes to becoming proficient in resawing. I've made two frame saws and it was fun to build them. Like building foot powered lathes you do it because it suits you. My larger framer saw is patterned after the one Adam Cherubini featured in his article in PWW. Instead of a four foot long blade, I opted for a three foot blade instead which is breasted. It sports an aggressive 2 tpi blade and the other one has a blade with 4 tpi. I built them and have not put them to heavy use yet. I have a bandsaw, but if I want to resaw a thick plank a frame saw is a cool option.
The renaissance woodworker blog on frame saws is cool too. Here is a picture of the two frame saws and a chair maker's bow saw I made for cutting out chair seats. Both frame saws work well and I used spade bits for blade holders on one saw and used pins, wedges and welded iron blade holders on the other.
frame saws in shop.jpg
Last edited by Jim Paulson; 07-23-2013 at 9:05 PM.
This is a good source for how to make a large frame saw and how to use it
http://www.amazon.com/Woodworking-Te...ight+technique
See pages 81, and 282-284
This is a good book in general for making jigs and comparing hand tool and machine tool techniques.
Here are photos of a frame saw I made from purple heart (because it is very strong wood) and the blade I made for it from a bandsaw blade.
Sharpening is Facetating.Good enough is good enoughButBetter is Better.
Oh and one more thought;
Don't even bother unless you are a long distance athlete: cycling, running . . . better yet a rower or swimmer.
Can we say AEROBIC ! ! ! Bordering on anaerobic when the teeth are filed too aggressive or the plank wide and hard.
Suuuurrrrre will make you appreciate a nice bandsaw though. Makes clicking that "buy now" button on a $2000 bandsaw effortless.
Last edited by Winton Applegate; 07-23-2013 at 9:02 PM.
Sharpening is Facetating.Good enough is good enoughButBetter is Better.
Winton,
The purple heart is beautiful on your saw. I built my first frame saw out of ash and I used spade bits for blade holders and I threaded the ends to accept nuts as your saw uses for tensioning the blade. I had to anneal the spade bits first so they could be drilled to allow the blade or web to be bolted on, and to tap it for threads. That worked out pretty well too.
Richard,
Another source of information for building a Roubo frame saw is Mike Siemsen's blog at http://schoolofwood.com/node/59 He describes building a frame saw based on what was learned from Adam Cherubini's experience with making a large frame saw. They opted to make their saw blade/web out of 2" wide 1095 steel that was 4 foot long. My larger saw has a 4 inch wide blade, 36 inches long and out of 1095 steel.
Best wishes,
Jim
Jim,
Thanks ! I was hoping you would put up a photo or more, the better, of your saws. Man, you've been busy. This is important work; to at the very least learn about and know first hand how it was done before power came to the wood shop.
People think I am some kind of nut using purple heart and bubbinga for my tools I have made; cocobolo on others.purple heart is beautiful on your saw
I don't use them because they are pretty, at least in the beginning, or because I want the endangered species to disappear as quickly as possible. I use these species because they are the strongest thing around wood wise. You ought to see my bubbinga Krenov style saw horses. Spindly weak looking little suckers but STRONG LIKE BULL and small so they nestle out of the way. Four take up hardly any room.
Sharpening is Facetating.Good enough is good enoughButBetter is Better.
Judging from previous discussions we've had on the topic, the frame saws seem to be love-it-or-hate-it.
I built one that was very loosely based on Mike Siemsen's approach, but using a ~26" commercial blade by Putsch. Those blades, I had been warned, are not really hard enough and might need some additional sharpening, but it was cheaper and considerably easier than buying a roll of 1095 spring steel and filing big bad wolf teeth entirely from scratch (for some strange reason, I don't have a Foley hand-operated toother like Siemsen did ). I also ran out of maple and ended up using yellow pine for the stretchers just to get something going. The pine is way too flexible; the frame of a frame saw needs to be rock solid once the blade is in tension.
So, I didn't really create a good example to experiment with, but I have to say the main problem I had was not the saw itself, it was how to hold the wood. I used the leg vise on my workbench, but... the workbench top is right where the frame of this unwieldy contraption wants to go. To stay away from the workbench, I had to hold the saw too high to be comfortable / put my weight into it. So the saw soon began to tilt downwards, and then I tore a large splintery chunk off the left front corner of my workbench top on one of the backstrokes. Were I to further seriously pursue the frame saw for resawing, I would consider building something like this:
ebenistes-detail.jpg
flicker
Last edited by Andrae Covington; 07-23-2013 at 11:46 PM.
[QUOTE=Andrae Covington;213547 I also ran out of maple and ended up using yellow pine for the stretchers just to get something going. The pine is way too flexible; the frame of a frame saw needs to be rock solid once the blade is in tension.
[/QUOTE]
Interesting comment Andrea. When I built my second frame saw I built the arms/ends out of cherry and used pine for the stretchers with no negative effect. The stretchers are joined to the arms via mortise and tenon joints. I had planned to replace the stretchers with hardwood later. I'll have to check the dimensions of the stretchers (probably 1.5 inches square). So I think pine is okay if the thickness/dimensions allow for it.
Bummer on the bench top. That tells me I'll use a piece of MDF or something to anticipate damage to the bench top when ripping stock. I love the engraving you posted. Did you notice what seems to be a hole in the floor?
Great to converse with folks into resawing!
There are a couple of great resources to build one.
If you want to build the Roubo frame saw, Isaac Smith (Blackburn Tools) sells 36" and 48" saw plates.
http://www.blackburntools.com/new-to...ade/index.html
Artisan Iron Designs sells the hardware for a Roubo frame saw
http://www.artisanirondesigns.com/sh...aspx?itemid=48
If you want to build a smaller frame saw, Dominic Greco sells 28" saw plates in 2" and 4" widths.
http://tgiag.com/sawplate.html
Steve
This is a good source for how to make a large frame saw and how to use it
http://www.amazon.com/Woodworking-Te...ight+technique
See pages 81, and 282-284
I own a copy of this book, and am very intrigued about the article on the frame saw. I also am contemplating buildin and usin one. I did note, however, that the author likes to use the table saw with the blade set at max height to start the cut, then finish it with the frame saw. Very non-Neander, methinks!
We used an original veneer cutting frame saw in the movie we made about spinet and violin making. It went very well,and Marcus and I were sawing 1/8" veneer quite accurately. If I were younger,I'd like to have a repro of that veneer saw.
Thank you all for your responses. Greatly appreciated.
What about large frame saws (or should I say bow saws??) for cross cutting?
Bow saws shine for crosscutting.
You will need to support the offcut, or the blade will be caught.
I reach through the frame with my free (left) hand to catch that last bit.
I particularly like the bowsaw for ripping longer boards with straight grain.
For crosscutting smaller stock, a standard saw is adequate.