Hello,
I am building a nightstand with two doors on the front bottom. I have used SOSS hidden hinges for the doors. One of the door closes almost perfectly, the other is about 1/2 inch proud. These hinges are mortised into the door frame and the cabinet side. I suspect that the problem is with the hinge installation, but not sure what to do to correct. Both hinges are flush with the surrounding wood.
I have included 3 pictures; one of the overall cabinet and the second a close-up of the problem, and a third a closeup of the hinge installation.
Thanks for the help.
If this should be in another forum, please advise and I will move this posting.
Earl