Well, in no way is this fine furniture. It's all construction grade pine left "rustic" since I don't have a planer and the belt sander could only do so much. I sealed it with de-waxed shellac before using a gel stain glaze and satin poly, as well as paste wax. The wood probably wasn't dry enough prior to flattening since the growth rings have raised a bit. 2x4's for the rails, 2x12's for the top, and 4x4's for the legs all connected with glue and pocket screws. I made it narrower so we could move around it better, but now we can't push the chair in at the ends. Next time I'll measure the chairs first!image.jpgimage.jpgimage.jpg