-
Thanks, Mike... I spent about an hour on the phone with Steve (Sheperd) last night going over options. I've decided upon a mid-range Oki, a swingaway press fro Geo Knight, and the MagicTouch paper. The MT site is somewhat useless from a newbie standpoint, however... lots of options, but not a shred of info as to what the difference is from one paper to the next. My guess is the different papers are designed for different machines, but how hard is it to list the recommended machines with each one? 6, 6.2, 6.3, 6.4 what? I also hear the "salesmen" are just as clueless...
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru
)
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules