I have an Epilog mini 35 watt engraver - I started to run a job and my engraver just stopped! No power...There is electric going to it. Any Idea what this could be? Thanks!
I have an Epilog mini 35 watt engraver - I started to run a job and my engraver just stopped! No power...There is electric going to it. Any Idea what this could be? Thanks!
Might have tripped a breaker inside the laser ,blown a fuse, the power supply died. Those would be my first guesses, is there any indication that the power supply is working?
Might have broken a belt. We need more info - display panel on? Laser beam/red light on? Fan on?
Turn power on and off & tried a known good job?
Steve \o/Dynamite With A Laser Beam LLC
Epilog Helix 75W/Epilog Fusion Edge 80W and Jet 1642-EVS2
It may be as simple as one of the interlocks not making connection.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Linda the best bet is in the morning call Epilog they are great
Craig Matheny
Anaheim, Ca
45 watt Epilog Laser, 60 watt Epilog Laser,
Plasma Cutter, MiG Welder
Rikon 70-100 Lathe
Shop Smith V510, To many hand Tools and
Universal Repair Kit (1- Hammer and 1- Roll of Duck Tape)