I thought this would be an interesting topic to get feedback on. Most of the time I work on the left side of the saw blade. However, I just purchased a new table saw that is left tilt. The fence capacity is built into the right side of the saw blade. So does the design assume the operator will work on the right side of the blade. Do most of you work on the side of the blade away from the blade tilt? In other words if the blade is right tilt, you work on the left side, if it is left tilt, you work on the right side. I'm curious what everyone else does and why. Maybe there are safety considerations that should be considered that would suggest one side is better than the other. Since I'm not real experienced, I'm curious what everyone else does and why.