Next up on my list of shop-furniture was a router table to replace the wing-table that became useless when I sold the contractor TS it was attached to. Driving home one day I saw a dresser that someone had put out on the curb. Out I jump to look it over - missing a few drawer pulls and a set of drawer slides, but its very solid so into the car it goes. Turns out it will make a great base for my new router table in it's second life.
The top is 3/4 birch faced MDF core plywood laminated together and wrapped in plain ol' pine. I made it niiiice and big - 2.5' by 5'. Finished with 3 coats of varnish and several coats of Johnson's paste wax.
The router plate is the Phenolic Pinnacle from Woodcraft, which consensus says is a re-branded Woodpecker. I like it a lot, and luckily the mounting holes on my Ridgid R2930 router match up with the PC690 series accessories.
My fence is the one from Rockler, mounted to T-track - Ill have to add a miter slot eventually, kinda forgot about that til I was all done...