Try to clear the walls in the height where workpieces needs space when they are machined. So, high storage or low storage, keep the middle height clean where the wood travel. If you have an assembly table, place the router in that and skip the seperate router table. Get rid of all non needed things. Do you really need 2 bandsaws and 2 miter saws?
My shop is about the same size as yours (15×13 feet equals around 20 square meters) and in my opinion one of the better layouted shops in this size. I put quite some effort and many iterations into this final layout. The "keep the wood travel paths clean"-idea i mentioned above is shown at around 3 minutes.
https://youtu.be/9zeXpj8I2Ic
Originally Posted by Ola Carmonius
Contributor
Reply With Quote
