Building 6 ft high, 28 in wide, 12 inch deep solid 3/4 inch walnut bookshelf , no adjustable shelves. I have dados for all shelves. The sides are a little bowed, requiring some pressure with clamps to pull them together with the dados. Not a ton, but some. I'm trying to decide if I need to add screws with plugs or pocket screws (never used them) or if glue will be adequate. The dados are roughly 5/16 inch deep.
Trying to avoid screws from the outside with plugs because the wood is beautiful, but I would do it.
Have never used pocket screws, but I can learn.
Or is glue enough?
I've searched and searched on this with no luck.