Results 1 to 15 of 38

Thread: Suitable relay for three wire control on a VFD

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-11-2019, 12:53 PM #1
    Tom Trees's Avatar
    Tom Trees
    Tom Trees is offline [OP] Member
    Join Date
    Aug 2014
    Posts
    1,007

    Suitable relay for three wire control on a VFD

    Hello folks
    I have been walking through the steps with another forum member on setting up a VFD for his saw.
    Unfortunately the VFD does not have a relay OR COMMON for three wire control/push button station.
    Can any of you guys point me in the right direction to find a suitable relay for him?

    Any help would be much appreciated.

    Many thanks in advance.
    Tom
    Last edited by Tom Trees; 10-11-2019 at 7:21 PM. Reason: Common, or reset is the part I need in between NC and NO button station
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules