Finally finished my vacuum tall fence for my slider.
Made of commercially available parts from companies in the CNC industry.
Aluminum T-slot plate 16” x 24”
4) 4” x 4” aluminum pods
pneumatic switch
powered by vacuum pump from Vacuum clamping systems.

The objectives for this fence were to accurately cut box tops off boxes, cut reliefs in thin wood for box bottom aprons and to be used as a bench top holding jig.

I make a lot of boxes and have tried every way possible for cutting boxes in two. With this fence and vacuum pods combined with a diamond thin kerf blade, I don't think there is a better method. Too many reasons to list.
This fence far exceeded my expectations and is just another enhancement to the utility and safety of a slider especially for small work.
Another realized benefit is the plate/pods for bench work. The holding power, speed of changing work positions, and accessibility to your work without traditional clamps is a game changer for me.
0F7C0971-1D6C-424C-9FF3-F81687AEDF38.jpg1E8296A2-E0A7-4AAE-AA27-B595488C5F8F.jpg63F6325A-C5CE-4EA2-80F9-5B4A7A7C2ACC.jpg444B7491-DD7F-4F35-9A34-A5025E991401.jpg3A196AFD-909B-43C8-9D88-E00B5F5C3A1E.jpg5C343640-6609-4656-865C-B8DC6527A3C6.jpg