I’ve been looking on eBay lately for a large router plane but for the prices I’ve seen on there I might as well buy a premium brand for just a few more dollars. I’ve always liked buying older planes and restoring them better as long I’m don’t paying the same as high quality new. So my question is veratis or Lie Nielsen I like the look and depth stop better on the LN. The veratis comes with 2 blades straight and spear point two pieces with honing guide which is good positive since I free hand sharpen. I already have the veratis small router for hinge mortises. So the primary use would be dados,half laps,and bridal joints not perfect off my saw. So to me it’s a coin flip so I’d figured what y’all opinion are.