Page 1 of 2 12 LastLast
Results 1 to 15 of 23

Thread: Neander interview: Mark Singer

  1. #1
    Join Date
    Sep 2003
    Plano, TX

    Neander interview: Mark Singer

    1. Name (and nick names)
    Mark Singer

    2. Age/DOB

    3. Location (present and previous):
    Laguna Beach , California

    4. Tell us about your family
    Married for 35 years...son: Ryan is an Architect, Daughter: Jessica is a fashion designer...Java is a Labrador he is the senior member of the Family at 14 1/2, Dexter is a Chihuahua...7 years old and 7 pounds

    5. How do you earn a living, woodworking or other, any interesting previous occupations.
    I am an Architect....Mark Singer Architects, Inc,...A General Partner in a restaurant Group....All "Opah" locations ..."Agave"..."230 Forest Ave". When I finished my degree I became a general contractor building homes and commercial buildings and I did all my finish work, stair building, door hanging and other trades.

    6. Equipment overview (hand tools and other)
    PM 66 table saw, Aggazani 20" band saw, Delta DJ20 jointer, Jet 15" Planer, General 24" drum sander, Delta drill press, Jet mortiser, jet combination sander, Jet spindle sander, Oneida cyclone, Jet 14" band saw, older and newer hand tools, Deifenbach Ultimate workbench.

    7. Describe your shop
    800 sf 12 ft ceiling 2 large overhead doors, skylights, Concrete floor. My table saw outfeed table is a 4x 8 bench...this is where most of my glue ups, assembly, sanding and finishing take place. My large workbench is where most of the joinery, planning, and shaping are done

    8. Tell us about the hand planes you own, and your favorite one(s) to use
    I have several older and newer planes, some were my fathers old Stanleys...newer ECE Primus, Lie Nielsen, Clifton, Knight, Veritas low angle trio, Veritas, Clifton, and Lie Neilsen shoulder planes....the ECE, Veritas and Knight planes are all favorites

    9. You favorite chisels
    I have many older ones that I like ...the Lie Neilsens are very good as well...the Nootigoten have excellent balance

    10. Your favorite handsaw(s)
    I seem to prefer the older ones. Distons, Taylor and sons, Tyzack and Turner...newer ones include Lie Nielsen Dovetail and a Sephar

    11. Do you use western tools or Japanese, why do you prefer the ones you use
    I have both Japanese and Western saws...I have used western saws most of my life and have only started with Japanese saws in the last 10 years...I do like them both depending on the wood and the joinery required The Japanese saws are mostly Tashiro Zeta saws, which have fine blades and very easy to use.

    12. Do you have a woodworking home page
    Just my architectural one:

    13. Do you have any influences in your work? Certain styles or designers you follow/prefer
    I am influenced by many designers, Arne Jacobsen, Hans Wegner, Finn Jhule, Krenov, Maloof, DiNovi, Charles Eames, Breuer, Corbusier, and Mies van der Rohe. Antonio Gaudi. I like clean modern designs but they must have is a subtlety and it should not be over done.
    I started drawing at a very young age and when paired with woodworking I learned from my father...architecture and design were a natural course. I learned woodworking to be able to build what I designed ...I guess the same is true of my buildings ...I build to see my ideas become reality. I have won many awards for architecture, and several for furniture design including chairs, seating and tables

    14. Do you have any ancestors who were woodworkers that served as inspiration?
    My Father was a true craftsman and had a small custom repair business in New York, My Grandfather was a European Craftsman, came to America from Russia and fixed up residential buildings in Brooklyn and sold them...

    15. What is your favorite neander project, or part of a project, you have ever done and why
    I have really enjoyed building chairs, and other shaped organic feeling pieces... like my lamps and stacked lamination tables, they are challenging and require a high degree of thought and sensitivity. I have been designing chairs and seating for many years ... building prototypes for manufacturers has been a great lesson in ergonomics and the anatomy.

    16. Do you believe there is any spiritual dimension to woodworking with hand tools
    I believe our minds and hands should not be idle. We should use our abilities to create design is to explore what is within each of us...given one, life it is a journey worth taking... From creating comes an inner feel satisfied to know you have taken the sum total of what you were given and used it in a creative way. You become lost in the work and yet so aware of this place and this moment. Hand tools create such a dialog between the craftsman and the wood....the tool, whether its a plane or a rasp, becomes an extension of the body...almost as if it were part of you...and you develop a true sense of the nature and character of wood

    17. How much of your work is done by hand tools. Do you use whatever is best for the job or do you use hand tools even when they are less efficient
    I always chose a direct course to make a piece and use the easiest means for each task...but I must say without only takes a minute to hand plane an edge that comes off a refine it and remove the machine scallops...make the pieces feel like they grew together...I learned with hand tools , but I really appreciate machines and power tools, they make work easier and often better

    18. What is your single most favorite tool, and why
    The shaping tools are the ones that most connect the woodworker to the piece....hand planes, spokeshaves, rasps, scrapers....from these you understand the wood...the wood speaks as it takes shape and tells you what to do....what to curve and what to leave straight, what is to be soft and what should be an edge to contrast.....which direction to chose to work the wood...

    Mark Singer
    Last edited by Zahid Naqvi; 02-20-2006 at 6:31 PM.

  2. #2
    Join Date
    Mar 2003
    SE PA - Central Bucks County
    Excellent interview!!

    The most expensive tool is the one you buy "cheaply" and often...

  3. #3
    18 straight answers in a row from Mark - that's a record!
    Nice to learn a little more about another SMC legend.

    Dave Fried

  4. #4
    Join Date
    Jan 2004
    Lewiston, Idaho
    Great interview from one of the inspirations at SMC! Great to know some details about you Mark!

  5. #5
    Join Date
    Jun 2004
    KC, MO
    Talented and gracious - a good man that Mr. Singer!! A good teacher!!

  6. #6
    Wonderful Interview. Suprisingly, I actually recognized many of the designers named on your list.
    "When we build, let us think that we build forever." - Ruskin

  7. #7
    "My Father was a true craftsman and had a small custom repair business in New York, My Grandfather was a European Craftsman, came to America from Russia and fixed up residential buildings in Brooklyn and sold them..."

    No doubt they would be (are?) quite proud of how their skills have lived on in you. Very nice thread/interview of an inspiring creator of objets d'arts. And a generous teacher to boot.

  8. #8
    Join Date
    Sep 2003
    Columbia, SC
    Mark, thank you for your comments and insight. I really enjoy learning more about the people I admire in this board.
    Thank you, Zahid, for your idea and initiative to do these interviews.


  9. #9
    Join Date
    Sep 2003
    Plano, TX
    Mark has always been a great help for me, specially in design. His input and unique perspective on woodworking is an asset to this community.

  10. #10
    Join Date
    Sep 2003
    Grand Marais, MN. A transplant from Minneapolis
    Another fine Job. Good to know you.
    Live Like You Mean It.

  11. #11
    It's always interesting to know more about someone who loves what he does AND does what he loves so well. Nice to know you Mark...

    p.s.- I can also tell you...Mark is also excellant at picking great not so expensive wine.
    Glenn Clabo

  12. #12
    Join Date
    Feb 2003
    Just outside of Spring Green, Wisconsin
    I am, at the same time envious and grateful. Envious that you are able to truly live your dream and grateful that you are so very willing to share it! Mark, as always, you are inspirational, my friend! Thanks for the additional insight.
    John K. Miliunas

    Cannot find REALITY.SYS. Universe halted.
    60 grit is a turning tool, ain't it?
    SMC is totally supported by volunteers and your generosity! Please help if you can!
    Looking for something for nothing? Check here!

  13. #13
    Join Date
    Dec 2003
    Laguna Beach , Ca.
    Thank you and thank all of you for your wonderful comments.

    Most things we do in life can be thought of as falling into two areas....wisdom or knowledge and the the other is intelligence or skill......SMC is a wonderful place to gain wisdom and to do someting?....what should the design be like? is it held together? ..What is the best way to do it?...There are so many experienced woodworkers here that are very willing to share their knowledge...

    The skill and intelligence is somewhat can improve with time as well....if we set higher standards we can reach new levels and with each new project...there is a new understanding of what "excellent" really means...

    I am amazed at the body of very high end crafstman that are SMC members and these interviews are very inspirational....they let woodworkers at every level know the path that has worked for others....
    there is not one answer...for each of us it is different...I have learned a great deal from others here at SMC and I am very happy to share my experiences...again I must say..."This is a great place"
    "All great work starts with love .... then it is no longer work"

  14. #14
    Join Date
    Sep 2004
    Etobicoke, Ontario

    Thanks for being so generous with your time and advice...I know many of us are benefitting from your experience.

    Louis Bois
    "and so it goes..." Kurt Vonnegut Jr.

  15. #15
    Join Date
    Dec 2004
    East Jordan, MI
    Thanks Mark,

    As always, nice words.

    John Bailey
    Sawmill Creek is a member supported forum. Click here to donate.

Similar Threads

  1. Tashiro dovetail saw, which one ?? (Mark Singer)
    By Zahid Naqvi in forum Neanderthal Haven
    Replies: 7
    Last Post: 09-06-2005, 4:31 PM
  2. Creeker Visit to Mark Singer Shop!
    By Roy Wall in forum General Woodworking and Power Tools
    Replies: 14
    Last Post: 06-15-2005, 11:09 AM
  3. Question for Mark Singer, rather long, sorry
    By Jim Dunn in forum Design Forum
    Replies: 2
    Last Post: 02-08-2005, 8:53 AM
  4. Hey Mark Singer!
    By Tom LaRussa in forum Design Forum
    Replies: 3
    Last Post: 01-21-2005, 11:11 PM
  5. HEY, Mark Singer!
    By John Miliunas in forum Off Topic Forum
    Replies: 4
    Last Post: 10-13-2004, 12:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts