I'm contemplating buying my first CNC, a Onefinity. I'm an absolute noob to CNC but can see the benefit to many of the things I make. I'm a hobbiest but want a reasonable large format because I make cabinets and furniture, so I'm specifically looking at the Journeyman.

I mostly need 2 or 2.5D but once I have a machine I'm sure I'll play around with carving, too. I don't need production capability. I'm hoping I can upgrade to a higher level of SketchUp that exports DXF files and use those to feed some low cost or included software to generate the G code for the CNC.

If anyone here has a Onefinity I'd appreciate hearing your review, do's, don'ts, must haves, etc. Thanks.

John