I agree with Peter and Lisa! That is a toggle clamp that mounts to the T-slot on the top of the fence shown in the second picture.
David
I agree with Peter and Lisa! That is a toggle clamp that mounts to the T-slot on the top of the fence shown in the second picture.
David
Those are parts to a missile launcher that is being smuggles out of China. I predict a robbery soon. Just leave them outside and it will go well.
I should mention I have a 1000SE and a Miter Express. These parts aren't mentioned in either manual.
Wood working is like a vicious cycle. The more tools you buy the more you find to buy.
If you want the official most accurate answer I would contact Woodpeckers or Incra. They both have great customer support and will know exactly what those pieces attach to.
Those are not listed in the manual in all likelihood because they are shop made additions. See the part of the manual on making zero clearance fence faces. The MDF and red pieces look like fence faces with t-track on top to hold the hold-down clamp. Slide the MDF with the weld-nuts onto the miter gauge rail and tighten. Then the clamp goes in the t-track. The MDF is also suitable to use as a zero-clearance backer for the miter gauge--stop the extrusion before the blade and mount MDF past the blade to push through on table saw. Really nice bonuses to your purchase!!
earl
Correction: After some recollection I came to the realization these parts were shipped in the box with the router table top hardware.
Wood working is like a vicious cycle. The more tools you buy the more you find to buy.